<10-Ton Hydraulic Press (Model YD06 - 001) Introduction>

I. Product Specifications

1. Model Number: YD06 - 001
2. Capacity: It has a working capacity of 12 tons, capable of handling work tasks with relatively high pressure requirements.
3. External Dimensions: The overall width is 535 mm, and the overall height reaches 1305 mm. This dimensional design ensures operational stability while being adaptable to various working spaces.
4. Internal Dimensions: The inside width between the rails is 457 mm, providing a suitable space for placing and operating work - pieces.
5. Cylinder Stroke: The cylinder stroke is 125 mm, which can meet the pressing operation needs within a certain range.
6. Platform Heights: The platform height is adjustable from 200 mm to 920 mm, increasing the flexibility and versatility of the equipment.
7. Shipping Weight: With a shipping weight of only 43 kg, it is relatively lightweight and easy to handle and install.

II. Product Details

III. Application Scenarios

1. Automotive Repair Industry: It can be used for press - fitting and dismounting of automotive components, such as press - fitting bearings and gears, as well as correcting deformed body parts, helping automotive repair personnel complete repair work more efficiently.
2. Mechanical Assembly Field: In the production and assembly process of various mechanical equipment, it is used to precisely press different components together to ensure assembly accuracy and improve product quality.
3. Metal Processing Industry: It can perform bending, straightening and other processing operations on metal plates and pipes to meet the processing needs of different metal products.
4. Electronic Equipment Manufacturing: In the production of some small electronic devices, it is used for the precise press - fitting of components to ensure the stable internal structure of electronic devices.

IV. Frequently Asked Questions

1. What should I do if the pressure is unstable? Unstable pressure may be caused by insufficient hydraulic oil, leakage in the hydraulic system or a malfunction of the hydraulic pump. First, check whether the hydraulic oil level is normal. If it is insufficient, add oil to the appropriate level. Then, check whether there are any leakage points in all connection parts of the hydraulic system. If there is a leak, repair it in time. If everything is normal, the hydraulic pump may be faulty and a professional repairman should be contacted for maintenance.
2. What if the cylinder stroke cannot reach the specified length? It may be due to air in the cylinder, worn seals or a malfunction of the solenoid valve controlling the cylinder. First, perform an air - bleeding operation on the cylinder to remove the internal air. If it doesn't work, check whether the seals are worn and replace them if necessary. Finally, check whether the solenoid valve is working properly.
3. Why is the noise too loud during the operation of the equipment? Excessive noise may be caused by the viscosity of the hydraulic oil being too high or too low, severe wear of the hydraulic pump or unstable installation of the equipment. First, check whether the viscosity of the hydraulic oil meets the requirements and adjust it accordingly. If the hydraulic pump is severely worn, replace it. At the same time, check the installation of the equipment to ensure it is placed stably.
4. What if there is a failure in adjusting the platform height? It may be due to damage to the mechanical parts of the adjustment mechanism or a problem with the control circuit. First, check whether the mechanical parts of the adjustment mechanism are damaged or stuck. If so, repair or replace them. If the mechanical parts are normal, check whether there is a fault in the control circuit and contact a professional for repair.