Machine Introduction:

The HX-6575 fully automatic positive and negative pressure three-station hot forming machine is an advanced hot forming equipment that focuses on "multi-scene adaptation, high-precision processing, and high-efficiency production". It solves the pain points of "single category, insufficient precision, and high energy consumption" for plastic processing enterprises with flexible material compatibility, precise parameter control, and strong processing performance, fully meeting the production needs of high-quality control and high production capacity.

Key Features:

1.Control system characteristics

(1) The human-computer interface adopts an ultra-high definition MCGS color IoT touch screen. In case of abnormal problems, it can connect mobile phone hotspots to achieve remote monitoring, remote upgrade programs, and solve various vulnerabilities.

(2) This machine system is self-developed by our company according to the operating habits of the current national conditions. The number of empty machine test actions can reach 50 modules/minute at the fastest. It has the characteristics of complete functions and is easy to use. The master with an ordinary machine foundation can operate independently for 2-3 days, and the master with other all-in-one machine experience can be familiar with the operation within 1 day.

(3) Monitoring counting, automatic lubrication when the station reaches the number of actions, vacuum maintenance prompt when the time comes, document storage, internal IO point monitoring, and other functions.

(4) See the equipment specification for other control system features.

2.Manipulator system

(1) The manipulator moves up, down, left, and right with a high-power torque servo to ensure that the whole machine operates 24 hours without overheating.

(2) Manipulator mode: up and down stacking, lifting and stacking, in mold grasping and stacking (customized), out of mold grasping and stacking (customized).

(3) Discharge mode: default to side or straight out (customized), so that the machine can adapt to various sites.

3.Material receiving system

The latest torque reducer is used in the material collecting system to ensure powerful winding, and the controller is simple and easy to adjust, while the traditional frequency conversion control is prone to burning the motor.

4. Chain rail drive system

(1) A large power 4.5KW servo is used to pull sheets, ensuring that the machine can pull 1.5mm thick sheets at most.

(2) The reducer adopts a high-precision reducer and a spline shaft as the transmission shaft to ensure that the pulling error is within ± 0.5mm.

(3) The chain rail adopts an aluminum body girder with guide beads to ensure the abrasion resistance of the girder.

(4) The chain adopts Japanese CHOHO guide bead chain, which is hardened and hardened, stable and wear-resistant, with accurate in pulling.

(5) The front, middle, and rear electric adjustment of the girder is convenient and simple.

5.Cooling system

The standard configuration of a 10P supercharged air-cooled chiller has a better cooling effect and faster delivery speed.

6.Vacuum system

Vacuum pump adopts Jingjie 200 m³/ H. 0.4m for the vacuum tank³. Designed to meet the instant vacuum release, so that the product can be formed faster and the product quality is better.

7. Lubrication system

(1) The station lubricating pump adopts a high-capacity and high-pressure lubricating pump to reduce the number of times of manually loading oil into the pump. It works for a long time and is not easy to burn the pump. 00 # grease must be used;

(2) Chain lubrication system: food-grade chain oil is used to lubricate the packaging chain to reduce wear.

Machine parameters: