HX 76HS Pressure Thermoforming Machine Fast Preheating And Energy Saving

Product Description:

Various types of films (PVC, PP, PE, POF, PPT, PTGF, APET, ABS, OPP, PS, PET, etc.) can be vacuum molded into plastic covers of different shapes through different molds, such as toys, hardware, food, electronics, pharmaceuticals, daily necessities, clothing, as well as ceiling panels, wall panels, cake boxes, automotive materials, and sanitary materials with three-dimensional relief patterns, forming exquisite inner lining and outer packaging, making products refreshing and improving competitiveness.

Main Features:
1. Vacuum regulation: supports delayed/primary/secondary vacuum, suitable for different product vacuum requirements.

2. Demoulding optimization: Multiple bottom air and advanced air blowing to solve the difficult demoulding problem of high difficulty products.

3. Fast heating: Preheat for 2 minutes+maintain constant temperature for 5 minutes (about 20 minutes for old machines), saving 20% electricity.

4. Accurate temperature control: 1 main control module with 60 heating bricks, supporting unified temperature setting and independent temperature adjustment.

5. Temperature monitoring: The probe displays the furnace temperature in real-time and determines whether it is constant temperature.

6. Silicone oil spraying: front spray with milk water to assist demolding, rear spray with anti-static liquid to prevent dust.

7. Secondary molding: Apply pressure during demolding, making it easy to demold and preventing product deformation

8. Two-speed mode: upper and lower modes with fast and slow speed regulation, suitable for high difficulty products

9. Advance gate control: The lower gate pull tab does not scratch, and the upper gate is easier to form in advance.

10Rapid cooling: delayed cold air+water spray to improve production speed.

11. Vibration demolding: Efficient production of difficult products, safe and fast demolding.

12. Sheet pulling: reducing material waste and improving utilization rate.

Machine Parameters: