Fully Automatic Toilet Paper Machine 3800mm Type High Speed Paper Napkin Machine
Key Specifications
| Paper grade |
13-30gsm |
| Design speed |
250m/min |
| Working speed |
160-230m/min |
| Capacity |
11-18Ton/day |
| Gauge |
4800mm |
Product Overview
The 3800mm Type High-speed Tissue Paper Machine is designed for efficient production of toilet paper and napkin base paper with pulp weights of 13-30 g/㎡.
Application
Primarily used for manufacturing toilet paper and paper napkin base paper from wood pulp plate or waste paper raw materials.
Craft Parameters
- Pulp: Wood pulp plate, waste paper
- Feeding pulp concentration: 0.3-0.9‰
- Beating degrees: 30-38°SR
- Paper sheet dryness: 18-20% from wire case, 36-40% before MG cylinder, 90-94% finish tissue
- Lateral shrinkage: 8-10%
- Day running hours: 22 hours/day
- Papermaking rate: 94%
- Yield: 95%
- Touch roll line pressure: 60 KN/m
Supporting Parameters
- AC voltage: 380V; 50Hz
- Control voltage: 220/24V
- Water pressure: 0.3Mpa (Working: 0.2Mpa)
- Compressed air pressure: 0.8Mpa (Working: 0.5Mpa)
- Steam pressure: 0.6Mpa (Working: 0.3Mpa)
- Vacuum suction tank: 20-40Kpa
- Water requirement: Pure color, remove impurities, PH value 6.8
Technical Specifications
- Paper weight: 18-30g/m²
- Net width of paper: 3500mm
- Designed speed: 250m/min
- Working speed: 160-230m/min
- Nominal capacity: 10-15T/D
- Track gauge: 4500mm
- Wrinkling rate: 15-30%
- Drive way: Y-type AC motor drive division, section drive
- Control way: Frequency conversion
- Power: MG cylinder motor: 95kw, Roll-cylinder motor: 7.5kw (Total: 102.5Kw)
- Arrangement: Single-layer, left and right hand arrangement
Machine Model Comparison
| Item / PM type |
1575 |
1880 |
2400 |
2900 |
3500 |
3800 |
| Design Speed (m/min) |
250 |
250 |
250 |
250 |
250 |
250 |
| Working Speed (m/min) |
160-230 |
160-230 |
160-230 |
160-230 |
160-230 |
160-230 |
| GSM Range (g/m²) |
13-30 |
13-30 |
13-30 |
13-30 |
13-30 |
13-30 |
| Capacity |
4-6 |
5-8 |
7-10 |
8-12 |
10-15 |
11-18 |
| Diameter of Dryer (mm) |
Φ2500-3000 |
Φ2500-3000 |
Φ2500-3000 |
Φ2500-3000 |
Φ2500-3000 |
Φ2500-3000 |
| Motor (kw) |
37-45 |
45-55 |
55-75 |
75-90 |
90-110 |
90-110 |
| Gauge(mm) |
2400 |
2800 |
3400 |
3900 |
4500 |
4800 |