Lab / Industrial 150 Degrees Device Remote Control Microwave Drying Centrifugal Fan
Low Temperature Device HY-DP600 is lab or industrial used microwave dryer that can heat materials with high efficiency, thus drying time can be reduced from hours to minutes.
HY-DP600 uses 304 stainless steel chamber, which is corrosion resistant and high temperature resistant.
HY-DP600 uses PTFE coating on the surface.
HY-DP600 is equiped with lighting system and centrifugal fan.
HY-DP600 is capable of remote control of the equipment switch.
HY-DP600 is designed for removing moisture from samples, thus is suitable for rapid drying and moisture analysis..
| Parameters | HY-DP600 | |
| Power | Voltage | 220V±10V 50Hz |
| Rated Power | 6KW | |
| Microwave System |
Microwave Output Power |
0.10~4.00KW continuously adjustable |
| Microwave Frequency | 2.45GHz | |
| Microwave Leakage Prevention | microwave leakage intensity<0.5mW/cm2 | |
| Thermal Insulation System | Temperature | 150°C |
| Heating Space(L×W×H) | 400×400×400mm | |
| Temperature Control System |
Temperature Measurement Method |
thermocouple |
| Temperature Measurement Range |
0~800°C | |
| Temperature Control Precision |
±0.1% | |
| Control System |
Auto, Manual and Isothermal Controlling Mode, PLC+Touch Screen |
40 segments of programmable technical parameters,data storage and export, real-time curve data display,dynamic data display |
| Exhaust Sysytem | centrifugal fan CY112-H | |
| Loading Sysytem | auto rotary loading tray | |
| Safety System |
Magnetron Alarm | over temperature alarm |
| Furnace Door Protection Alarm | furnace door shutdown sensor | |
| Overall Dimension |
Furnace Body(L×W×H) | ca. 1000×600×600mm |