AZS power grains azs ramming mass

The fused AZS power AZS grains azs ramming mass is made by crushing the fused bricks according to a certain particle gradation ratio. usually have 0-1, 1-3, 3-5, 5-8mm, or 200 mesh, 325 mesh powers.

China electrocast refractory factory 200 mesh AZS power Zirconium replacement for ceramic body brightening in ceramic industries

Note: Above mentioned indexes allow few deviation for special demanded products.

Henan Hongtai AZS power AZS grains

1)Raw material to factory→checkout→burdening→stirring→mixing→taking out the raw material,
2)Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packaging and Shipment.

2.Quality Assurance
1)Going out the furnace→checkout→packing→qualified product→putting in storage→sale,
2)The process from raw to product are strictly tested by equipment.
1.Inspection and Control of incoming raw materials: according to the chemical content,raw materials are classified into different levels to ensure quality of brick first.
2.Inspection and control of the process: during the production,every brick will be weighed twice strictly to reduce the error of weight .
3.Quality audit by quality management: inspection of product standardization of quality of each product by process control and experimentation, taking corrective measures timely whenever deviations are noted.
4.Before delivery, the inspectors will inspect the size,appearance, physical and chemical properties of brick again in factory.

China electrocast refractory factory 200 mesh AZS power Zirconium replacement for ceramic body brightening in ceramic industries

Henan Hongtai Kiln Refractory Co., Ltd. is established in 2005 and located in Xinmi city, 40 kilometers southwest of Zhengzhou city. Rich resources of refractory materials, adequate and qualified fuel in this area, provide unique conditions for refractory production.

Main products are high alumina brick, clay brick, fused zirconium corundum brick, AZS power, fireproof ball lightweight insulation brick, wear-resistant pouring material, corundum pouring material, low cement high strength pouring material, impermeable material, self-flowing material, plastic material, and various types of refractory materials.

China electrocast refractory factory 200 mesh AZS power Zirconium replacement for ceramic body brightening in ceramic industries

The azs power azs grains refers to an amorphous product that is pre-laid at the working temperature/ceramic bonding.

Hongtai has developed a range of integrated products that are a by-product of the electrofusion line and the sintering line. These monolithic products are mainly used in:

- Zirconium replacement for ceramic body brightening in ceramic industries

- Safety layer for the bottom and the channel

- Cold repair/hot repair special application security layer

- Mud between different refractory materials or brick joints

China electrocast refractory factory 200 mesh AZS power Zirconium replacement for ceramic body brightening in ceramic industries

AZS power AZS grains Packaging & Shipping

High temperature resistance glass kiln used AZS 33,AZS36,AZS41 ER1681 brick are packaged with fumigated wooden pallet, using paper or non-woven fabrics between layers separated,plastic shrink film protected outside.finally using straps. Or as your requirements.

Delivery:

15-30 days working day for large quantity. The shipment we will arrange as soon as possible. Of course, if it is a custom products, the shipping time will delay.
Sample:

Usually by EMS, DHL, UPS, TNT, FedEx. Anyway you like. Bulk order: Usually by sea.Payment: It can be through T/T, L/C at sight. The specific terms determined according to the quantity of the goods, etc.
Your inquiry related to our product & price will be replied within 24 hours.
Export:
Our products have been exported to many countries: Australia, Chile, USA, Russia, UK, Indonesia, etc., good quality have be approved by our clients.