SAE4140 / 1.7225 / SCM440 / 42CrMo Alloy Steel Round Bar with Ultra-high Strength

SAE4140 / 1.7225 / SCM440 /42CrMo steel is an ultra-high strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low temperature impact toughness.

1. Equivalent grades

2. Chemical Composition (%)

3. Mechanical Properties

1) Tensile strength:σb (MPa): ≥1080(110);
2) Yield strength:σs (MPa): ≥930(95);
3) Elongation:δ5 (%): ≥12;
4) Section shrinkage:ψ (%): ≥45;
5) Impact work:Akv (J): ≥63;
6) Impact toughness value:αkv (J/cm²):≥78(8).

4. Recommend heat treatment

5. Application
It used for section large forgings, such as locomotive traction gears, with supercharger drive gear, the rear axle, the connecting rod and the spring load greatly clip,oil drill pipe joints and fishing tools,etc.

6. Feature
1) Weldability suffers with increasing chromium content;
2) High temperature strength and high pressure hydrogenation properties are promoted by chromium and molybdenum;
3) Molybdenum significantly reduces temper brittleness;
4) Chromium renders steel oil hardenable and increase hardenability;
5) Chromium molybdenum high tensile steel with yield strength of 550N/mm2.

7. About SAE4140 / 1.7225 / SCM440 / 42CrMo

8. Ready Stock:

Round Bar diameter 14-460mm.

All the sizes as require can be customerized as fresh production with MOQ.

9. Delivery state:

Hot rolled, Heat Treatment,black, hardness or tempered hardness:28-34 HRC.
Annealing: HBS<=235.

10. Delivery time:

1) For abundant stock, 15-20 days.

2) For customized products, 30-50 days.
We have full set of equipement (sawing machine/grinding/polishing machine) to make customer's specification.

11. Our service:

13. FAQ:

14. Corner of our factory: