Milky White Granule Bookbinding Hot Melt Glue Adhesive , EVA And Viscosity Resin Spine Glue
YD-5AB
SPECIFICATIONS
| Properties Specifications Test Methods | ||
| BASE | EVA and Viscosity resin | |
| COLOR | Milky white | |
| SHAPE | Granule | |
| SOFTEN POINT | ≥85℃ | GB/T15332-1994 |
| PEELING STRENGTH | ≥55N/2.5CM | GB/T2790-1995 |
| VISCOSITY(180℃) | 2200±500mpa.s | HG/T3660-1999 |
| OPEN TIME | 7~10s | |
SUGGESTIONS
1. Should be applied by 2-component spray gun.
2. Coverage: depending on the porosity of substrates, test is needed.
3. Substrate surface should be dry and oil or grease free.
4. Contact: Immediately after the application
5. Open time: Approx. 10 ~ 20 min.
6. Assembly: Pressure may be needed by manual or mechanical methods to enhance the initial bonding.
7. Final bonding strength test: 2 to 24 hours after bonding assembly, make sure the bonded adhesive is
fully cured and dried.
