Laboratory Pharmaceutical Stability Chamber for Long Term Stability Testing RDS-250T
- Utilizes electronic PID control, supporting programmable multi-segment settings;
- Equipped with an intelligent operating system and a high-performance processor, ensuring simple operation and a user-friendly experience;
- Features data recording and storage capabilities, capable of storing up to three years of experimental data (recorded at a frequency of once per minute); raw data can be exported via a USB flash drive and is tamper-proof;
- Allows for the review of historical temperature and humidity data or real-time trend curves (displaying data from the most recent 8 to 10 hours);
- Includes audit trail and data traceability functions: capable of storing 16,000 operation and alarm logs; data is stored internally within the system and can be exported via a USB flash drive, remaining tamper-proof;
- Permission management function: an administrator can create up to 5 user accounts and assign different operational permissions to each;
- Features multi-point temperature calibration capabilities, effectively eliminating linear deviations during multi-point temperature measurements;
- Utilizes compressors and condenser fans from renowned brands, employing environmentally friendly refrigerants;
- Adopts a variable-frequency refrigeration system, ensuring energy efficiency and high performance; temperature and humidity fluctuations are minimal, and recovery is rapid following door opening;
- Equipped with a capacitive humidity sensor, offering precise and reliable measurements with no requirement for routine maintenance;
- A standard 50mm diameter test port is provided on the right side of the chamber;
- Features a dual-door structural design, with the inner door fitted with tempered glass to facilitate direct observation of experimental conditions within the working chamber;
- The chamber is pre-configured with standard communication interfaces-including USB, RS485, and RS232-allowing for seamless integration with LIMS systems;
- Supports menu language switching between Chinese and English.
| Model |
RDS-750T |
RDS-1000T |
| Control mode |
P+Dfuzy logic control ordinary/program fuzzy operation |
| Display screen |
7-inch LCD touch screen |
| Temperature range |
No light-10°C~85ºC Ther is light.5°C-65ºC |
| Humidity range |
No light15~95%RH/±2%RH There is light20-95%RH±2%RH |
| Temperature controlaccuracy |
±0.1ºC |
| Humidity fluctuation degree |
±2%RH |
| Light intensity |
6000LUX |
| lluminance devation |
≤500LUX |
| Extermal dimensions(w"H'D)mm |
1350×1800×760 |
1350×1800×965 |
| Innertanksize(W"H'D)mm |
1200×1200×505 |
1200×1200×710 |
| Productweight |
285KG |
345KG |
| Capacity |
725L |
1025L |
| Total power for heating and humidication |
3200W |
3200W |
| Refrigeration instructions |
700W.R134a |
700W.R404a |
| Humidity sensor |
Imported temperatue and humidity sensor |
| Refrigeration method |
The cooling capacity of the compressor can be intlligently adjusted |
| Workingenvironment temperature |
5ºC-35°Cit s recommended touse the ambient temperature10ºC-28°ºC |
| Power supplyvoltage |
AC-220V 50/60HZ |
| Safety device |
Itfeatures automatcstat-up,automaticstop.pDower-on reroNer,timed operation,and is equiped with compressr oVepressure protetion, over-temperature alarm,leakage protection,water shortage protection,door opening alrm,and sensor abnormality alarm functions |
| Stainless steel shelf |
Thee floors (optonal) |
