| Detecting gas | Combustible gases, toxic gases, etc. |
| Detection range | Determine the testing scope based on different environments. |
| Detection principle | Catalytic combustion, electrochemistry, infrared principles, PID principles (optional) |
| Accuracy | ±3%FS |
| Repeatability | ±2% |
| Response time | T90 < 30S (T90 depends on the sensor characteristics) |
| Power supply | 24VDC (Normal operating voltage range: 10~30VDC) |
| Power consumption | <1.5W (toxic gas) <2.5W (combustible gas) |
| Output signal | Two sets of passive relays (24VDC 2A) output simultaneously: three-wire 4-20mA or four-wire RS485 or both. |
| Protection level | IP66 |
| Temperature range | -20ºC~50ºC (Toxic gas) -40ºC~70ºC (combustible gas) |
| Humidity range | 10-95% RH (non-condensing) |
| Pressure range | 86~106 kPa |
| Explosion-proof certification | Ex db IIC T6 Gb |
The MIC100-R Fixed Remote Gas Detector is designed for real-time gas monitoring in industrial environments such as chemical plants, oil & gas facilities, and environmental monitoring sites. The split structure allows the sensor and controller to be installed separately, improving installation flexibility and safety. The standard split cable length is 1 meter, and it can be extended up to 10 meters to meet different installation requirements.