PGH-3LB
HYDROGEN GENERATOR
High-Purity Hydrogen | Stable Pressure | On-Demand Production
PURE-WATER SPE TECHNOLOGY
A compact hydrogen generation solution using solid polymer electrolyte (SPE) technology for high-purity hydrogen output without alkaline solution.
LABORATORY • MEDICAL • INDUSTRIAL APPLICATIONS
Beijing Zetron Technology Co., Ltd.
The PGH series hydrogen generator adopts solid polymer electrolyte (SPE) hydrogen production technology, using pure water as the electrolyte. High-purity hydrogen is generated by electrolysis through titanium metal electrodes, with a relative oxygen content of less than 0.1 ppm. The hydrogen is then separated from water, dried and purified before output.
Its core advantages include stable pressure with fluctuation below 0.001 MPa, on-demand hydrogen production, and no alkaline solution addition. The system is suitable for laboratory, medical and industrial applications.
CORE ADVANTAGES
Relative oxygen content < 0.1 ppm after gas-water separation, drying and purification.
Pressure fluctuation is maintained below 0.001 MPa.
Hydrogen is generated as required, supporting continuous or intermittent operation.
Uses pure water or twice-distilled water; no alkaline solution is required.
| Parameter | Specification |
|---|---|
| Product Model | PGH-3LB |
| Gas Purity | 99.999% (relative oxygen content < 0.1 ppm) |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.7 MPa (factory default: 0.4 MPa) |
| Maximum Power | 1200 W |
| Power Supply | 220 V, 50 Hz |
| Dimensions (L × W × H) | 600 × 350 × 550 mm |
| Weight | Approximately 35 kg |
| Water Quality Requirement | > 2 MΩ deionized water or twice-distilled water |
PERFORMANCE HIGHLIGHTS
Electrolysis Cell Efficiency
Maximum Hydrogen Output
Factory Default Pressure
APPLICATION AREAS
Suitable for laboratory hydrogen supply requirements.
Suitable for medical hydrogen supply requirements.
Suitable for industrial hydrogen supply requirements.
