HPPV Series High Dirt Holding Capacity Pleated Water Filters
The HPPV series pleated water filter adopts multi-layer Nano-fiber material, gradient structure design, and has high dirt holding capacity. The large-to-small gradient pore size makes the filter cartridge has stronger dirt holding capacity, which can effectively improve surface clogging problem and extend filter service life. It is suitable for high suspended particles, colloidal substances, and high-viscosity liquids.
Material Constructions
Filter Media | Polypropylene (PP) |
Support/Drainage | Polypropylene (PP) |
Cage/Core/End Caps | Polypropylene (PP) |
Seal Material | Silicone, NBR, Viton, EPDM, Teflon |
Performance
Filtration rating | 0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 100μm |
Maximum Operating Temperature | 80ºC |
Maximum Operating Difference Pressure | 4bar/21ºC 2.4bar/80ºC |
Filtration Efficiency
PPH | >95% | >98% | >99.8% | >99.9% |
0.3μm | 0.15 | 0.22 | 0.3 | 0.5 |
0.5μm | 0.22 | 0.3 | 0.5 | 0.65 |
0.65μm | 0.45 | 0.5 | 0.65 | 0.8 |
0.8μm | 0.5 | 0.65 | 0.8 | 1.0 |
1.0μm | 0.65 | 0.8 | 1.0 | 3.0 |
3.0μm | 1.0 | 2.0 | 3.0 | 5.0 |
Ordering Information
HPPV 0500 10 C1 E
Series | Micron | Length | End Cap Type | Seal material |
HPPV | 0050=0.5μm | 05=5" | C1 | =226/Spear | E | =EPDM |
| 0080=0.8μm | 10=10" | C3 | =222/Spear | S | =Silicone |
| 0100=1.0μm | 20=20" | C5 | =222/Flat | V | =Viton |
| 0300=3.0μm | 30=30" | C6 | =226/Flat | P | =Teflon |
| 0500=5.0μm | 40=40" | C9 | =DOE | | |
| 1000=10μm | | | | | |
| 2000=20μm | | | | | |
| 4000=40μm | | | | | |
| 7000=70μm | | | | | |
| 9000=90μm | | | | | |