Watt-hour Meter Calibrator , Electric Energy Meter Calibrating Tester , Power Meter Calibrator

I. Product Description:

The calibrating set is special for calibrating test to

• Measurement of electrical meter parameters such as three-phase current, voltage, active power, reactive power, power factor, angle, frequency etc.
• On-site verification of many electrical meter like three-phase active and reactive power inductive, electronic energy meter etc.
• On-site calibration of integrated error of metering device.

III. Features

• Measurement of electrical parameters such as three-phase current, voltage, active power, reactive power, power factor, angle, frequency etc.
• On-site verification of many electrical instruments like three-phase active and reactive power inductive, electronic energy meter etc.
• On-site calibration of integrated error of metering device.
• Voltage input of 0-400V auto-switching range, to ensure accuracy.
• Two ways for current input: terminals or clamp meter, the maximum measurable current of 500A.
• Real-time display, instantly identify wiring errors, stealing behavior is under control.
• CT ratio measurement.
• Store measured data of 200 meters.
• Equipped with computer through RS232 serial port on the device for the data management, real paperless office.
• Large LCD display, clear, easy to operate.
• Supply both from the power outlet (AC 220V) and from the grid (AC 80-400V), fully consider the site conditions of use.
• Equipped with three-phase testing power, as the three-phase test devices.
• Strong ability to adapt to live load, stable and reliable.
• Small size, light weight, beautiful appearance, easy to carry.

IV. Technical data

V. Accessories:

• Instruction manual 1 copy
• Factory report 1 copy
• Service card 1 copy
• Test lead wire 1 set
• Optical sampler 1 piece
• Pulse sampling line 1 piece
• Line of communication 1 piece
• 5A Clamp meter 3 pieces
• Software CD 1 copy
• Power line 1 piece
• 2A protective tube 2 pieces
• Wiring bag 1 piece