3d MMFU machne Cartridge shot | 10,000 shots/PC |
8 units MMFU Cartridge | 1.5mm 3.0mm, 4.5mm,6.0mm,8.0mm,10mm,13mm,16mm |
Spacing | 1.0-10mm(0.5mm/step) |
Output power | 0.2-2.0J(0.1J/step) |
MMFU face lift cartridge Length | 5.0-25mm(1.0mm/step) |
Function | Anti-aging, Skin Tightening, Wrinkle Remover |
Details Images




How to use the 3D HIFU?
1. Clean the Skin.
2. Take a photo before treatment, and paint on the preoperative lifting location with make - up pencil.
3. According to the skin, thickness to select appropriated transducer (Transmitter).
4.Set suitable input intensity ( such as1.0-1.5J), focal length and spacing ( such as 1.5mm)
5. Applying the ultrasonic plentiful gel as the medium between transducer and skin.
6.face lifting operates on the note of power line, forming a line thermal condensed node
in the specified depth under the skin when the transmitting button is pressed per time,
operating continued on the power line until the specified location transmission is completed.
The treatment parts such as the face, chin and both sides of the neck.
7.don't operate on marginal mandibular nerve and supra or vital nerve.
8. No recovery period after treatment, daub some moisture product and makeup immediately.
9.only once, the comprehensive effect will gradually appea