The Transformer Winding Deformation Tester uses the advanced Frequency Response Analysis (FRA) method to measure characteristic parameters of internal transformer windings. It is a highly precise diagnostic tool engineered to accurately identify internal faults.

| Parameter | Value |
|---|---|
| Scanning Method (Linear) | (10Hz)–(10MHz), 40,000 sweep frequency points |
| Scanning Method (Segmented) | (0.5kHz)–(1MHz), 2,000 sweep frequency points; 0.5kHz–10MHz sub-bands |
| Amplitude Measurement Range | (−120dB) to (+20dB) |
| Amplitude Accuracy | 0.1dB |
| Scanning Frequency Accuracy | 0.01% |
| Impedance (Input / Output) | 1MΩ / 50Ω |
| Signal Output Amplitude | ±20V |
| Repeatability Rate | 99.9% |
| Instrument Dimensions | 300 × 340 × 120 (mm) |
| Case Dimensions | 310 × 400 × 330 (mm) |
| Total Weight | 10 kg |