Copper And Aluminum Radiators Machine
Product Description Of Copper And Aluminum Radiators Machine
scrap AC conditioner radiator stripper machine Recycling equipment:
This machine. radiator recycling and separating machine, is an environment-friendlyrecycling equipment, used for separating copper pipes from aluminum. Designed and manufactured byus ,This machine is anewly-designed compact one, taking up small area. Little materials (radiators) will ba lost duringprocessing,so,this machine is practical and economical.
Machine Structure of the scrap AC conditioner radiator stripper machine Recycling equipment:
This scrap AC conditioner radiator stripper machine Recycling equipment machine is consisted of a frame, two motors, two speed reducers, material feeding part, materiacutting part,material.
separation part, transmission part and material feeding panel.Raditor Stripper Recycling equipment.

Machine Operation Step Of The Copper And Aluminum Radiators Machine :
1. Turn the reversing swith and check the rotating direction.
2. lnject oil into the two oil holes in the left and right side of the machine to lubricate transmission gears(normally once per 4 working hours)
3.Push different radiator into different material inlets according to their specs(19mm,21mm,25mm); theleft side of radiators must touch the left side of material inlets; or the right side of radiators must touchthe right side of material inlets (the first copper pipe in the lower layer shall be nearer to the guidingruler,When two-layer radiators are processed, the left side of the radiators shall touch the left side ofeach Material lnlet, and the first copper pipe in the Upper Layer to the left side of each Material lnletmust be nearer than the first copper pipe in the Lower Layer to the Left Side of each Materiallnlet. )
4.After radiators are taken into the machine, copper pipes and aluminum are separated and come outof the machine automatically.
5.According to the lavers of radiators and their height, adiust each pair of Adjusting Wheels on themachine (after
adjusting,tighten screws below).
Motor Power:3kw+4kw | Knife roller speed:132r/min |
Blade Diameter:100mm/108mm | Number of blades:69pieces |
Voltage Frequency:380v50Hz | Processing Speci fication:25mm/21mm/19mm |
Dimension:1700/850*1180mm | capacity300-600kg/h |
01 How to get to know the machine very well?
Machine'Solution from our chief engineer, based on your rawmaterials,final product, and other detailed requirements from you.Supporting customization, Voltage changing, Plug type to fit foryour local. etc.Providing Machine video and photo give youdirect feeling about our machine
Usually Half as deposit,half as balance or full paymentBy TT,L/C,Western Union,Paypal,VISAMASTECARDE-CHECKING By Trade assurance paying online inUSD OR CNY