Waste refrigerator crushing sorting machine

Waste refrigerator crushing sorting equipment:
Waste Refrigerator Recycling Production Line, after feeding, goes through multiple processing procedures, and presents the purest Copper, Aluminum, Iron, Plastic and Foam.
1. When the waste refrigerator (or freezer) is on the unpowered drum, disassembleit manually and remove the plastic and glass from the box.
2. According to different types of refrigerants, refrigerant recovery devices are usedto classify and recover refrigerants. Remove the compressor and condenser,etc.
3. The whole machine enters a double-shaft shredder for shredding and preliminarycrushing.
4. The materials enter the hammer crusher, and are crushed for the second timethrough crushing and kneading by the crusher.
Waste refrigerator crushing sorting equipment technical characteristics
1. Heavy moving blade,high crushing power,the blade is made of wear-resistant steel,strong wear resistance, long service life.
2. It is driven by decelerating motor, with strong power, low speed, large torque, low noise, time-saving and labor-saving.
3. The product belongs to the fully automated equipment, set up start, stop, reverse and overload automatic reverse control functions, the use of complete functions, convenient and fast.
4. The blade arrangement and bite mode are designed for metal, and the thickness of props and the number of claws can be changed according to different materials.
5. Easy to adjust, low maintenance cost, uniform discharge, long use time.


WORKFLOW
1.When the waste refrigerator (or freezer) is on the unpowered drum, disassembleit manually and remove the plastic and glass from the box. 2.According to different types of refrigerants, refrigerant recovery devices are usedto classify and recover refrigerants. Remove the compressor and condenser,etc.
3.The whole machine enters a double-shaft shredder for shredding and preliminarycrushing.
4.The materials enter the hammer crusher, and are crushed for the second timethrough crushing and kneading by the crusher.
5.At the same time of secondary crushing, part of polyurethane foam will beseparated into foam separator by air separation. Heavy materials such as plasticand metal enter the belt conveyor. 6.Materials crushed by plastic and metal are separated by magnetic separation onthe belt, and then enter eddy current separation.
7.Non-ferrous metals, such as copper and aluminum, are separated by eddycurrent,and plastic and foam materials are transported to the airflow separationsystem through belts to separate pure plastic and foam. Polyurethane foam iscompressed into blocks by a foam crusher.
Waste refrigerator crushing sorting equipment:
At the same time of secondary crushing, part of polyurethane foam will beseparated into foam separator by air separation. Heavy materials such as plasticand metal enter the belt conveyor.
Materials crushed by plastic and metal are separated by magnetic separation onthe belt, and then enter eddy current separation.
Non-ferrous metals, such as copper and aluminum, are separated by eddycurrent,and plastic and foam materials are transported to the airflow separationsystem through belts to separate pure plastic and foam. Polyurethane foam iscompressed into blocks by a foam crusher.
Waste refrigerator crushing sorting equipment:




