Digital Glucose Meter Spare part Test Strips and Lancets
Use Method:
- Open the machine, and put the strips
- Lancets take the blood
- With the blood on the strips
- Anout 10 seconds, there is result
Notice:
- Clean your hand before take the blood. Rub the fingers to increase the blood flow of the fingers to avoid insufficient blood volume during blood collection and affecting the measurement results
- Before blood collection, it is disinfected with alcohol to avoid wound infection; Colleagues should avoid using iodine for disinfection to prevent the result error
- The blood collection should be completed at one time. If the blood collection is too small to meet the test, the test paper must be replaced to collect blood again
- After the test paper is removed, the blood sampling and measurement shall be completed within 3 minutes to avoid the test paper being polluted by the air for a long time and affecting the measurement results
Technological Parameters
| Model | DS-6 |
| Response Time: | 5 Seconds |
| Sample: | Fresh capillary / Venous / Arterial whole blood |
| Sample Size: | Minimum 0.6μL microlitre |
| Measuring Range | 0.5-33.3 mmol/L (9~600 mg/dL) |
| Enzyme: | GDH-CE |
| Hematocrit: | 0-70% |
| Calibration Method: | Auto-coding |
| Strip Type: | BS-602 (GDH 8 electrodos) |
| Strip Shelf Life: | 24 months from manufacturing date |
| Memory: | 360 blood glucose results with date and time |
| Communication: | optional |
| Unit of measure: | mmol/L or mg/dL; switchable |
| LCD Size: | 35.4*30.9 mm (L*H) |
| Power source: | one 3.0 V alkaline battery ,size CR2032,included |
| Battery life: | About 1000 tests |
| Dimension: | 90*61*23.6 mm (L*W*H) |
| Weight: | Approximate 51.6 g, battery not included |
| Operating environment: | 5℃~45℃(41℉~113℉) 10 ~ 90% RH (non-condensing) |
| Meter storage environment: | -20℃~ 55℃ ( -4℉~131℉)10 ~ 95% RH (non-condensing) |
| Strip storage environment: | 10℃~ 30℃ (33.8℉~86℉) |
| Altitude: | Up to 10,000 feet (3,048 meters) above sea level |
Quality assurance
- Every production process has a special person to test to ensure quality
- Have professional engineers to check the quality
- All products have passed CE, FCC, ROHS and other certifications
