| Supported OS | 
			
			
				- Windows 7/8/8.1/2008/2008 R2/2012 (x86 & x64)
 
				- Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
 
			 
			 | 
		
		
			| Supported APIs | 
			
			
				- Windows
				
					- DirectShow
 
					- DirectKS
 
					- Wave API/DirectSound/WASAPI
 
				 
				 
				- Linux
				
				
 
			 
			 | 
		
		
			| Supported Software | 
			
			
				- VLC
 
				- VirtualDub
 
				- OBS
 
				- xSplit
 
				- vMix
 
				- VidBlaster
 
				- Wirecast
 
				- Microsoft Media Encoder
 
				- Adobe Flash Media Encoder
 
				- Any other DirectShow/V4L2 encoding/streaming software
 
			 
			 | 
		
		
			| Input Interfaces | 
			
			
				- DVI-I
				
					- DVI 1.0
 
					- HDMI 1.4a (via breakout cable)
 
					- VGA (via DVI2VGA connector)
 
					- Component (via breakout cable)
 
				 
				 
				- DB9
				
					- YC (S-Video)
 
					- Composite video
 
					- Analog audio (L+R)
 
					- Component video
 
				 
				 
				- BNC
				
				
 
			 
			 | 
		
		
			| Output Interfaces | 
			
			
			 | 
		
		
			| Input Features | 
			
			
				- Auto scan of video input sources when there is no signal input to the currently selected input source
 
				- Manual selection of video input source
 
				- Auto selection of linked (embedded) audio input source when the video input source changes
 
				- Manual selection of audio input source
 
				- Support for standard crossbar based on video input source selection
 
				- Support for input video resolutions up to 2048×2048 pixels
 
			 
			 | 
		
		
			| VGA & Component Specific Features | 
			
			
				- 12-bit ADC
 
				- Support for RGB & YCbCr (YUV) color formats
 
				- Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
 
				- Support for DMT, CEA, CVT, GTF video timings
 
				- Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
 
				- Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT officially supported)
 
				- Auto detection of RGB & YCbCr color formats
 
				- Auto or manual sampling phase adjustment
 
				- Auto horizontal alignment
 
				- Support for customized video timings
 
				- Support for customized video resolutions for CVT/GTF timings
 
			 
			 | 
		
		
			| HDMI Specific Features | 
			
			
				- 225MHz HDMI receiver
 
				- Adaptive HDMI equalizer support for cables lengths up to 30M
 
				- Support for customized EDID
 
				- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
 
				- Full colorimetry support
 
				- Support for 8/10/12-bit color depths
 
				- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
 
				- Support for up to 8-channel IEC60958/IEC61937 audio streams
 
				- Support for extraction of audio formation information & channel status data
 
				- Support for extraction of video timing information
 
				- Support for extraction of 3D format information
 
				- Support for extraction of Sony/Canon DSLR time code
 
			 
			 | 
		
		
			| SDI Specific Features | 
			
			
				- Integrated cable equalizer supporting cable lengths up to 230M for HD signals
 
				- Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
 
				- Support for 2K (2048×1080) mode
 
				- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
 
				- Support for 10/12-bit color depth
 
				- Support for extraction of SMPTE 352 payload identifier
 
				- Support for up to 8 audio channels at 48KHz
 
				- Support for extraction of audio formation information & channel status data
 
				- Limited support of 3Gb-DS: only the first stream can be captured
 
				- Limited support of 3Gb-DL:
				
					- 2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
 
					- Other modes: full supported
 
				 
				 
				- Limited support for capture of the first link of dual link interfaces:
				
					- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
 
					- YCbCr 4:4:4 10-bit: captured as 4:2:2
 
					- RGB 4:4:4: R/B sub-sampled
 
				 
				 
			 
			 | 
		
		
			| YC & Composite Specific Features | 
			
			
				- 12-bit ADC
 
				- Support for NTSC, PAL and SECAM standards
 
				- Auto detection of video input standard
 
			 
			 | 
		
		
			| Video Output Formats | 
			
			
				- Support for output image resolutions up to 2048×2048 pixels
 
				- Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
 
				- Support for 4:2:0 8-bit output formats: NV12, I420, YV12
 
				- Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
 
				- Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
 
				- Support for 4:4:4 10-bit output formats: V410, Y410
 
				- More output formats are supported via Pro Capture SDK for DirectKS
 
			 
			 | 
		
		
			| Video Processing Features | 
			
			
				- Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
 
				- Full 10-bit video processing
 
				- Video cropping
 
				- Video scaling
 
				- Video de-interlacing
				
					- Wave
 
					- Blend top & bottom field
 
					- Top field only
 
					- Bottom field only
 
				 
				 
				- Video aspect ratio conversion
				
					- Auto or manual selection of input aspect ratio
 
					- Auto or manual selection of output aspect ratio
 
					- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
 
				 
				 
				- Video color format conversion
				
					- Auto or manual selection of input color format & quantization range
 
					- Auto or manual selection of output color format, quantization range & saturation range
 
					- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
 
					- Support for Limited or Full quantization range
 
					- Support for Limited, Full & ‘Extended gamut’ saturation range
 
				 
				 
				- Video frame rate conversion
 
				- Video OSD composition
				
					- Support for PNG OSD image (up to 2048×2048)
 
					- Support for dynamic loading of RGBA OSD image via SDK
 
				 
				 
			 
			 | 
		
		
			| Multiple Cards per System | 
			
			
				- Support for multiple cards plugged to one system
 
				- On-board rotary switch to set card number, with 16 positions from 0 to F
 
				- System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
 
				- The video and audio device names displayed in your software will include the card number (set by the rotary switch)
 
			 
			 | 
		
		
			| Multiple Output Streams | 
			
			
				- Unlimited output streams for any one input channel
 
				- Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
 
			 
			 | 
		
		
			| Ultra Low Latency Support | 
			
			
				- Latency of 64 video lines
 
				- Partial notification mode in SDK
 
			 
			 | 
		
		
			| Timestamp & A/V Synchronization | 
			
			
				- Hardware based 100ns high resolution clock
 
				- Audio frames (192 audio samples) & video frames are stamped with hardware clock
 
				- Hardware clock can be synchronized across cards (via SDK)
 
			 
			 | 
		
		
			| Video Output SG-DMA | 
			
			
				- ~400MB/s per channel DMA bandwidth in PCIe 2.0 system
 
				- ~200MB/s per channel DMA bandwidth in PCIe 1.0 system
 
				- Support for auto detection of Intel tiled GPU surface
 
				- Support for DirectGMA for AMD video adapter chipsets
 
				- Support for GPUDirect for Nvidia video adapter chipsets
 
			 
			 | 
		
		
			| SDK | 
			
			
				- Pro Capture SDK for DirectShow for easy integration (Windows)
 
				- Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
 
			 
			 | 
		
		
			| Windows Driver Tweaks | 
			
			
				- All options can be controled by three levels of registry key: global level, product level and device level
 
				- Video, Audio, Crossbar filter names can be customized via registry keys
 
			 
			 | 
		
		
			| Firmware Upgrade | 
			
			
				- Multiple cards in one system can be upgraded simultaneously
 
				- Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
 
			 
			 | 
		
		
			| LED Indicator | 
			
			
				- Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
 
			 
			 | 
		
		
			| Form Factor | 
			
			
				- Normal profile PCIe x1 Add-on Card
 
				- 92.76mm x 96.24mm (without PCI bracket)
 
			 
			 | 
		
		
			| Accessories | 
			
			
				- DVI2VGA connector
 
				- DVI-I to HDMI + Component breakout
 
				- DB9 to YC + Composite + Analog Audio + Component breakout
 
			 
			 | 
		
		
			| Power Consumption | 
			
			
				- Max current at 12V ~0.4 A
 
				- Max current at 3.3V ~0.3 A
 
				- Max power consumption ~5.4 W
 
			 
			 | 
		
		
			| Working Environment | 
			
			
				- Operating temperature: 0 to 40 deg C
 
				- Storage temperature: –20 to 70 deg C
 
				- Relative Humidity: 5% to 90% non-condensing
 
			 
			 |