Multifunctional 4 channel Video+Ethernet+Audio+Phone Multiplexer - BNC to Fiber Optical Transmitter
* 4ch video to fiber
* Audio, Ethernet, Phone, Data optional
* thunder-protection design
* 1 year warranty, all life service
Multifunctional 4 channel Video+Ethernet+Audio+Phone Multiplexer - BNC to Fiber Optical Transmitter
transmit quad video signal, one Ethernet and one bidirectional RS485 data over fiber. Extra service slot is also offered for maximum 4 channel bidirectional audio, 4 channel bidirectional RS485, 4 channel RS232, 2 channel RS422, 4 channel bidirectional key or 4 channel phone.
Please feel free to contact us if you have buying demands. Competitive offers with high quality products will be always for you.
Technical Parameters
| Video | 1~4 channel video |
| Connector: BNC | |
| Signal format: PAL/NTSC/SECAM | |
| Standard input and output level: 1Vp-p | |
| Standard input and output impedance: 75Ω | |
| Bandwidth per channel: 6.5MHz | |
| Sampling frequency: 13.5MHz | |
| Digitization: 8bits | |
| Differential gain: <1% (typical) | |
| Differential phase: <1°(typical) | |
| SNR: 67dB (typical) | |
| Color brightness differential delay: 10ns (typical) | |
| Color brightness gain difference: ±10% (typical) | |
| Audio | Connector: 3.5mm connector jack |
| Sampling frequency: 25KHz | |
| Digitization: 16bits | |
| ADC(audio input) SNR: 89dB | |
| DAC(audio output) SNR: 92dB | |
| Standard input and output level: 1.5Vp-p | |
| RS485/RS422 | Connector: terminal block |
| Receiver input sensitivity: maximum ±200mV | |
| Receiver output current, IO: ±10mA | |
| The maximum rate of transmitting and receiving: 200Kbps | |
| RS232 | Connector: terminal block |
| Transmitting output voltage: 15V | |
| Receiving input voltage: 15V | |
| The maximum rate of transmitting and receiving: 200Kbps | |
| Ethernet | Comply with IEEE 802.3(2000) |
| Full/half duplex | |
| Maximum Ethernet frame length: 1536 | |
| Transmission rate: auto adapt 10/100M | |
| Maximum bandwidth: wire speed 100Mbps | |
| Key | Ground current for the input end: less than 10mA |
| Maximum tolerance voltage for the output end: 220V DC | |
| Maximum tolerance current for the output end: 2A | |
| Tolerance surge voltage for the output end: 1500V 10X160µS | |
| Action time: less than 4ms | |
| Maximum action frequency: 20times/minute | |
|
Output key longevity: 100 thousand times(2A 30V DC) 500 thousand times(1A 30V DC) |
|
| Fiber | 0~20km(single mode fiber-standard) |
| 0~60km(single mode fiber- long distance style) | |
| 0~2km(multi mode fiber, standard) | |
| Power | Power supply: DC+12V, range: 9V~18V AC220V, 220VAC±20%, 50HZ |
| Total consumption: 10W (one device) | |
| Environment | Operating temperature: -20°C ~+70°C |
| Storage temperature: -40°C~+80°C | |
| Relative humidity: 0~95% (non-condensing) | |
|
Corrosive and solvent gas, no dust, no strong magnetic interference |
Main Features
Ordering information
| Part No. | Description | Optic Specification | Fiber Connector |
| HD-S1V-T/RF | 1 Ch Forward Video,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S1V↑1D↓3-T/RF | 1 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S2V-T/RF | 2 Ch Forward Video,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S2V↑1D↓3-T/RF | 2 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S4V-T/RF | 4 Ch Forward Video,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S4V↑1D↓3-T/RF | 4 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S8V-T/RF | 8 Ch Forward Video,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S8V↑1D↓3-T/RF | 8 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC |
| HD-S16V-T/RFM | 16 Ch Forward Video,Standalone Converter(Small Box) | Single Fiber/SM/ 20km | Simplex FC |
| HD-S16V↑1D↓3-T/RFM | 16 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter(Small Box) | Single Fiber/SM/ 20km | Simplex FC |
| HD-S16V-T/RF | 16 Ch Forward Video,Standalone Converter(1U Rack) | Single Fiber/SM/ 20km | Simplex FC |
| HD-S16V↑1D↓3-T/RF | 16 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter(1U Rack) | Single Fiber/SM/ 20km | Simplex FC |
| HD-S32V-T/RF | 32 Ch Forward Video,Standalone Converter(1U Rack) | Single Fiber/SM/ 20km | Simplex FC |
| HD-S32V↑1D↓3-T/RF | 32 Ch Forward Video+1 Ch Reverse RS485 Data,Standalone Converter(1U Rack) | Single Fiber/SM/ 20km | Simplex FC |
| Part No. | Description | Optic Specification | Fiber Connector | Unit |
| HD-S1P-T/RF | 1 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S2P-T/RF | 2 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S4P-T/RF | 4 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S6P-T/RF | 6 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S8P-T/RF | 8 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S16P-T/RF | 16 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
| HD-S30P-T/RF | 30 Ch Telephone,Standalone Converter | Single Fiber/SM/ 20km | Simplex FC | Pair |
2009 HANDAR OPTICS Established in Nov 2009 , with professional R&D and sales team who had been working in fiber optical telecommunication field since 2004 .
2010 HANDAR OPTICS started to produce full range of multi-functional video/audio/data/Ethernet/Telephone/Alarm to fiber converters and became to one of the leading manufacturers in this field
2011 HANDAP OTPCIS founded our engineers team to develop the SFP transceivers , and start to produce 155M and 1.25G SFP transceivers at Aug 2011
2012 HANDAR OPTICS started the project for 10G SFP+
2013 HANDAR OPTICS founded our engineers team to develop the Industrial level Ethernet Switch and POE switch . and stated to produce at the end of 2013 .
2014 HANDAR OPTICS started the project for 40G QSFP/CFP/CFP2
2015 HANDAR OPTICS improved our products for analog video/audio/data multiplexer to High-Definition series , include Analog high-definition TVI/CVI/AHD and Digital high-definition SDI/HDMI . We became to the leading manufacturer of such products in Shenzhen China .
2016 HANDAR OPTICS moved to new office with better workshop which allow us to offer better products and services to our partners .
2017 HANDAR OPTICS will keep focusing on fiber optical telecommunications field and offer to all our partners higher quality and better services .
Multifunctional 4 channel Video+Ethernet+Audio+Phone Multiplexer - BNC to Fiber Optical Transmitter