DZ97189570286 Heavy Truck Electronic Gas Pedal Complete Assembly Hollow Lightweight Pedal Arm With Corrugated Protective Cable And Direct Plug Connector For Original Replacement

Product Description

This electronic accelerator pedal with part number DZ97189570286 adopts high toughness hollow engineering plastic pedal arm to reduce overall weight while guaranteeing structural strength the built in high precision displacement sensor converts pedal stroke into electronic signal to control engine fuel supply and rotational speed the outer wiring is wrapped with wear resistant corrugated hose to prevent line abrasion and short circuit the tail is equipped with a dedicated plug which can be directly inserted into the vehicle harness it can perfectly replace the failed insensitive or broken original accelerator pedal of matching heavy truck models and realize stable acceleration control.

Key Product Advantages

Built in high precision non contact position sensor delivers sensitive and linear signal output to avoid sudden speed surging or lagging during acceleration

Hollow grid pedal arm realizes lightweight design and effectively relieves foot fatigue during long distance driving with sufficient bearing strength

External spiral corrugated pipe fully wraps the wire harness to resist friction extrusion and rodent damage and greatly prolong the service life of internal wires

Standard plug and play connector matches the original vehicle wiring socket completely without wire stripping welding or additional wiring transformation

Fixed base hole position strictly follows original vehicle mold data which can be locked with bolts directly without drilling cutting or other secondary processing

Product Specification Table

Product Picture

FAQs

• Q Does this pedal come with the wiring harness and plug as a complete finished product
  
  
  A Yes the product is a fully assembled unit including pedal body sensor protective wire sleeve and matching male plug
• Q Will the signal be unstable after long term stepping use
  
  
  A Non contact induction structure has no mechanical wear which effectively prevents signal drift and failure caused by internal part abrasion
• Q Is it necessary to perform ECU matching after installation
  
  
  A It can work normally after plugging in the original vehicle line normally most models do not need extra program matching
• Q Can the corrugated outer tube prevent the internal wire from being worn out
  
  
  A The spiral flexible protective casing can buffer vibration and friction and reduce the probability of wire breakage inside the cab
• Q Which truck models is this electronic accelerator pedal suitable for
  
  
  A It is a special replacement spare part for Shacman heavy trucks corresponding to the official part number DZ97189570286