The Dell PowerEdge T360 addresses evolving compute demands with an easy-to-manage tower server designed for businesses looking for affordable enterprise features.
T360 | Technical Specification | |
Processor | One Intel Xeon E-2400 series processor with up to eight cores or one Intel Pentium G7400/ G7400T processor with up to two cores | |
Memory | • 4 DDR5 DIMM slots, supports UDIMM up to 32 GB per DIMM, speeds up to 4400 MT/s • Supports unregistered ECC DDR5 DIMMs only | |
Storage controllers | • Internal: HBA355i Adapter, PERC H355 Adapter, PERC H755 Adapter • Internal Boot: Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSDs drives, or USB • External HBA (non-RAID): HBA355e Adpt • Software RAID: S160 | |
Drive bays | Front bays: • Up to 4 x 3.5-inch SATA HDD/SSD, max 64 TB • Up to 8 x 3.5-inch SAS/SATA HDD/SSD, max 128 TB • Up to 8 x 2.5-inch SAS/SATA HDD/SSD with 3.5-inch to 2.5-inch adapter, max 61.44 TB | |
Power supplies | • 450 W Platinum 100-240 V AC, cabled • 600 W Platinum 100-240 V AC or 600 W 240 V DC, hot swap redundant • 700 W Titanium 200-240 V AC or 700 W 240 V DC, hot swap redundant | |
Fans | • One Standard (STD) fan and one optional High performance (HPR) fan | |
Up to two cabled fans | ||
Dimensions | • Height – 382.5 mm (15.06 inches) • Width – 175 mm (6.89 inches) • Depth – 579.72 mm (22.82 inches) with bezel | |
Form factor | 4.5U tower server | |
Embedded Management | • iDRAC9 • iDRAC Direct • iDRAC RESTful API with Redfish • iDRAC Service Manual | |
Ports | Front Ports • 1 x iDRAC Direct (Micro-AB USB) port • 1 x USB 3.2 Gen1 | Rear Ports • 3 x USB 2.0 • 3 x USB 3.2 Gen1 • 1 x Dedicated iDRAC Ethernet port • 1 x Serial • 1 x VGA • 2 x Ethernet ports |
Internal Ports • 1 x USB 3.2 Gen1 | ||
PCIe | Up to four PCIe slots • Slot 1: x8 Gen4 Full height, half length • Slot 2: x16 Gen5 Full height, half length • Slot 3: x1 Gen4 Full height, half length • Slot 4: x8 Gen4 Full height, half length |
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
Figure 2. Front view of 8 x 3.5-inch drive system
Figure 3. Rear view of the system
Figure 4. Rear view of the system with cable PSU
Figure 5. Inside view of the 8 x 3.5-inch configuration
1. PSU 2. System board
3. Intrusion switch 4. Cooling fan
5. Memory module sockets 6. Heat sink
7. Backplane