VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE
Products Overview
VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE Chassis compatibility Supported on all Catalyst 6500 E-series chassis and Catalyst 6807-XL chassis Switch fabric 2.08 Tbps Crossbar Switch Fabric with 26 Fabric Channels DRAM is 2GB for Lite and XL (4GB upgrade with 2GB memory upgrade (2+2) switching capacity up to 80 Gbps per slot of switching capacity on E-Series chassis Uplink ports (PORT 1 through PORT 5) Supervisor Engine 2T has five uplink ports: Two 10GBASE-X ports Three 1000BASE-X ports Each uplink port has a link LED associated with it.
Specification
| Name | VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE |
| IPv4 routing | In hardware |
| Up to 720 Mpps | |
| IPv6 routing | In hardware |
| Up to 390 Mpps** | |
| L2 bridging | In hardware VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE |
| Up to 720 Mpps** | |
| MPLS | MPLS in hardware to enable use of Layer 3 VPNs and EoMPLS tunneling. Up to 8192 VRFs with a total of up to 1024K forwarding entries per system. |
| VLAN | 4K VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE |
| Bridge domains | 16k |
| VPLS | In hardware (Up to 390 Mpps**) |
| GRE | In hardware (Up to 390 Mpps**) |
| NAT | Hardware assisted VS-S2T-10G-XL Commercial Wifi Access Point Sup 2T with 2x10GbE and 3 x 1GbE |
| MAC entries | 128k |
| Routes | 1024K (IPv4) |
| 512K (IPv6) | |
| Netflow entries | 1024K |
| Multicast routes | 128K (IPv4) |
| 128K (IPv6) |
