IPS TFT LCD Display - 2.4 Inch for Industrial IoT and Smart Manufacturing
Product Overview
Industrial IoT devices and smart manufacturing equipment require display components that combine reliable performance in factory floor environments with low power consumption for battery-powered or remotely-powered IoT devices. The 2.4 Inch IPS TFT LCD Display addresses both requirements through its combination of IPS wide viewing angle technology, SPI interface efficiency, and the proven NV3030B driver IC platform.
Factory floor environments present specific display challenges including varied lighting conditions, multiple operators viewing from different angles, and the need for consistent readability across ambient light ranges. The IPS panel provides free viewing angles for multi-operator viewing, while the 800-nit-equivalent brightness capability ensures readability in high-ambient-light conditions.
The SPI interface is particularly well-suited to IoT applications, using only four signal pins from the host microcontroller, leaving IO resources available for sensors, communication modules, and other system functions.
Technical Specifications
| Parameter |
Specification |
| Brand |
Genyu |
| Model |
GY-TFT024B051 |
| Panel Size |
2.4 Inch (diagonal) |
| LCD Resolution |
240 x 320 Dots |
| Viewing Angle |
Free (full viewing angle) |
| Driver IC |
NV3030B |
| Interface |
SPI |
| FPC Pins |
18 Pin soldering FPC |
| Certifications |
RoHS, ISO9001:2015 |
| MOQ |
1000 pieces |
| Supply Ability |
300,000 pcs / Month |
| Packaging |
Anti-plastic trays and carton boxes |
| Place of Origin |
China |
| Payment Terms |
T/T, PayPal, Western Union, MoneyGram, Credit Card |
Key Benefits
- IPS panel with free viewing angle for multi-operator factory floor environments - consistent color and brightness from any viewing angle ensures every operator sees information clearly regardless of position
- SPI interface for minimal IO pin usage in IoT devices - four-wire interface leaves microcontroller IO pins available for sensors, communication modules, and other critical system functions
- NV3030B driver IC with extensive embedded ecosystem support - driver libraries and example code available for major IoT microcontroller platforms including ESP32, STM32, and Arduino, reducing development time
- Low power design for battery-powered and remotely-powered IoT devices - SPI interface and efficient driver IC minimize current draw, extending battery life in portable or energy-harvesting devices
- RoHS and ISO9001:2015 certifications for industrial supply chain qualification - provides documentation required for industrial and commercial buyer qualification processes
Applications
Industrial IoT sensor display units, smart manufacturing equipment HMIs, factory automation control displays, environmental monitoring equipment screens, machine condition monitoring displays, industrial wearable device screens, and smart metering equipment displays.
Why It Works
Industrial IoT display applications differ fundamentally from consumer displays in their optimization priorities. While consumer devices prioritize resolution, color accuracy, and touch responsiveness, industrial IoT devices prioritize reliability, power efficiency, and development speed.
The SPI interface is particularly significant for IoT applications as it directly determines IO pin consumption on the host microcontroller. A parallel RGB interface might require 16-24 IO pins for the data bus alone, consuming a substantial fraction of a typical IoT microcontroller IO budget. The SPI interface uses only four pins total, regardless of display resolution.
For IoT devices that need to connect to sensors, wireless modules, and other peripherals, this pin savings can determine whether a small, low-cost microcontroller suffices or a larger, more expensive part is needed. The IPS panel is equally important in industrial contexts where factory floor displays are often viewed by multiple operators simultaneously from different positions.
Frequently Asked Questions
Q: Where is your factory?
A: Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
Q: What is the delivery time?
A: For sample order: 2-3 weeks. For mass production: 4-6 weeks.
Q: Can you support customization?
A: Yes, the interface, FPC cable, backlight, cover glass, and touch panels can be customized.
Q: Can I get a lower price for TFT LCD?
A: Yes, cheaper price with bigger/larger quantities order.
Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Q: Can you provide the technical support?
A: Yes, We will provide detailed specifications and initialization code.