Hydrostatic level transmitter input type with cable and level pressure sensor liquid level gauge with digital output    1.Convenient to use,flexible
  2.Widely used,easy to fit
  3.Wide measurement range
  4.High accuracy,good stability,high reliability
  5.Good design for water-proof
    
  Details
  Hydrostatic level transmitter input type with cable and level pressure sensor liquid level gauge with digital outputThe input
  hydrostatic level transmitter is a deformation product of the company's pressure test and is suitable for level measurement of open containers. It adopts two kinds of sensors: a cable structure adopting silicon piezoresistive transfer sensors, suitable for clean water, such as rivers, reservoirs, water tanks, wells, etc.; a ceramic pressure sensor with a stainless steel rod structure, suitable for sewage, oil , slurry and other applications.
    
  Application
  1. Water plants, sewage treatment plants, urban water supply
  2. pools, wells, mines, culverts, water tanks
  3. industrial pools, oil pools
  4. hydrogeology, reservoirs, river courses
  5. Marine salvage and seawater level measurement
  Technical parameters
  The basic error 0.5% F.S or 0.2% F.S
  The measurement range cable type
  Minimum 0 ~ 0.35m Maximum 0~100m
  Rod type (or air guide)
  Minimum 0~0.35m Maximum 0~3m
  power supply 24VDC
  Output 4-20mA (or 0 ~ 10mA, 1 ~ 5V, 0 ~ 10V) If you want to output the voltage signal, the sampling resistance should reach 0.05%
  accuracy
  Load resistance 250Ω
  Ambient temperature -20 ~ +85 °C
  Medium temperature -20 ~ +85 °C
  Storage temperature -40 ~ +125 °C
  The installation position directly into the bottom of the liquid
  Sensor housing material 1Cr18Ni9Ti or PTFE
  Sensor isolation diaphragm material 316L stainless steel or ceramic
  Air guide cable jacket material polyethylene