GS-V4-SW1280170550-UC-G is a high-performance uncooled short-wave infrared camera operating across 0.4-1.7μm spectral band. It adopts 1280×1024 InGaAs focal-plane array with 5μm pixel size, which simplifies the design of matched optical assemblies. Delivering 50Hz full-resolution output over GigE interface, this camera supports 8-bit and 12-bit digital output. Arbitrary ROI readout can raise frame-rate on demand. Compact lightweight construction enables seamless embedding into different optoelectronic systems.

1. Quantum efficiency >70 % within 0.4-1.6 μm; effective pixel ratio exceeds 99.5 %, minimizing dead pixels for clean infrared images.
2. High-density sensor array improves spatial resolution and lowers requirements for lens and optical assembly.
3. Global shutter architecture eliminates motion blur, perfectly adapted for moving target capture and high-speed detection tasks.
4. Crop any area of sensor to raise frame rate, balances high-resolution and high-speed for diverse inspection workflows.
5. Built-in auto/manual exposure & gain, non-uniformity correction and defective-pixel correction to output optimized images directly.
6. Manual brightness/contrast adjustment, image enhancement, crosshair overlay, test pattern output and parameter saving for on-site tuning.
7. GigE RJ45, SDI-SMA, HR10 power connector, TTL/LVDS trigger and standard C-mount, compatible with most industrial vision peripherals.
8. Under 5 W power draw, weight ≤170 g without lens, small dimension for space-constrained embedded optoelectronic systems.
9. Operates reliably from -40 ℃ to +55 ℃, storage temperature from -50 ℃ to +65 ℃, suitable for outdoor, airborne and industrial field deployment.
10. Dedicated control software and official SDK are supplied, allowing customers to embed camera into custom machine-vision and opto-electronic systems.

Note: Specifications are for reference only and subject to change without prior notice.

Semiconductor inspection, Low-light imaging, Astronomical observation, Hyperspectral imaging, Laser spot tracking imaging, Search-and-rescue remote sensing, Camouflage recognition, Garbage sorting

Q1: Does this camera need cooling components?

A: It is uncooled type without cooling structure.

Q2: What is the maximum frame rate when using window cropping mode?

A: The full-resolution frame rate is 50 Hz at 1280 × 1024. When you enable arbitrary-position windowing, the actual frame rate will increase as the readout window size decreases. Exact frame rate depends on your configured window resolution.

Q3: Can this camera work outdoors in cold environments?

A: The operating temperature range is -40 ℃ ~ +55 ℃. It supports outdoor operation within this temperature range. For long-term outdoor deployment, proper housing protection against moisture and dust is recommended.

Q4: Will ROI setting improve working frame-rate?

A: Yes, ROI configuration can lift practical frame-rate.