Sliding door opening motor sliding villa specific intelligent remote door opening machine
security protection
1:Must use 240 v power supply voltagedo not use the overpressure or under voltage;
2:The door installation or maintenance, please first cut off the input power supply;
3:Please make sure to open the door machine has reliable grounding, grounding resistance < 4 m, and have leakage short circuit protection;
4:Before starting the door, should remove obstacles,The door is operation, it is strictlyprohibited to vchicles, pedestrians walking;
5:Orbit by an appropriate location, the door machine side should firmly welding alimit block iron, iron block should be beyond the limits ofeleetrical limit place, canblock on both sides to walk round the body not to take offFrom the roller constraintsis advisable, in case ofelectrical limit failure when the gate from the constraints ofthe idler pulley on both sides cause tilting;
Protection and maintenance
1:The special clutch keyhole coated with a small amount of antirust oil, to prevent rust.
2:Regularly check the eleetrical grounding are in good condition,
3:Component are whether in good condition;
4:This motor adopts the advanced lubricating grease, do not need to replace or addlubricating oil.
Supply power: AC240w/50HZ
Starting current:3 A
running speed: 12m/min
Motor power:370W/550W/750W/ 1200W
Motor speed : 1400r/min4
Suitable door weight:100-2000KG
Temperature :-25℃~+70℃ ;8, Motor net weight : 12.2kg/12.8kg'14.5kg/16.2kg9,Reserved line installation :l square milimeter (or 1.5 square meter with two conductor)