Unit Cooling
● The cooling system of the gas generator set adopts the fully independent heat dissipation design, that is, the single
intercooling heat dissipation system and the cylinder liner heat dissipation system operate independently, so as to meet the unit's single repair and maintenance without affecting the operation of other units, which greatly meets the unit's maintenance and practicability.
● The hot air of the cooling system is discharged upward in a unified way to avoid hot air backflow and ensure the normal
operation of the cooling system of the unit.
● The cooling system increases the heat dissipation area and heat dissipation under normal heat dissipation conditions, and the cooling effect can better meet the normal operation of the unit under various extreme environmental conditions.
Power Generation Efficiency
(Take 250KW as an example for the following data)
● The full load gas consumption of the generator set is 70-80nm³/h
● The power of generating set is 250kw/h
● 1kW/h=3.6MJ
● 1Nm³/H natural gas calorific value 36MJ
● 31.25% ≤Power generation efficiency ≤35.71%
● 1Nm³ The natural gas power generation is 3.1-3.5kw/h
Adaptability of gas medium
● Applicable gas source calorific value range: 20MJ/Nm³-45MJ/Nm³
● Applicable gas source pressure range: low pressure (3-15kpa), medium pressure (200-450kpa), high pressure (450-700kpa);
● Suitable gas source temperature range: - 30 ~ 50 ℃;
● Design and calibrate the optimal system scheme and control strategy according to the customer's gas conditions to obtain the optimal gas source economy and equipment stability.