The Caltex-Approved Modular Design LED Diesel Price Sign features a robust ABS housing internally potted with A50 hardness clear epoxy resin glue, which fully encapsulates each LED tube for complete waterproofing and UV protection. Controlled by a 64*128 LCD screen remote with customizable boot logo, this front-maintenance sign requires no external acrylic panel. Digits (12" or 8" in red/green/white) connect via ribbon cables and support independent address codes for multi-sign installations without signal interference.
| DIGIT SIZE | DIGIT HEIGHT(mm) | DIGIT WIDTH(mm) | LED QTY(pcs) | VOLTAGE |
|---|---|---|---|---|
| 4'' | 124 | 75 | 42 | DC5V |
| 6'' | 161 | 103 | 64 | DC5V |
| 8'' | 201 | 119 | 98 | DC5V/12V |
| 10'' | 254 | 152 | 140 | DC5V/12V |
| 12'' | 304 | 177 | 182 | DC5V/12V |
| 15'' | 381 | 216 | 245 | DC5V/12V |
| 16'' | 412 | 235 | 350 | DC12V |
| 20'' | 500 | 281 | 434 | DC12V |
| 24'' | 600 | 350 | 581 | DC12V |
| 30'' | 750 | 438 | 840 | DC12V |
| Feature | Specification |
|---|---|
| Digit Color Option (Single Color) | Red /Green/Yellow/White/Blue |
| Digit Size Option | 12inch/8inch |
| Price Format | 8.88/ 88.88/ 888.8/888.88... |
| Product Option | With Iron Steel Cabinet or Only Component |
| Led Brightness | 4000mcd - 9000mcd |
| Led Life | > 100000 hours |
| Digit Case | ABS Material |
| Epoxy Resin Glue | A50 Hardness |
| Wireless Controller | Wireless Contrller Remote / PC software |
| Communication Option | RF (470mhz / 433mhz) / RS485 |
| Wireless Range | >250meters |
| Brightness Control | 6 Levels |
| Wireless Controller Rmote Power | 1.5V AAA Alkaline battery |
| Front Acrylic Board | No Need |
| Iron Steel Tihckness | 1.2mm Steel Plate |
| Remote Control LCD Screen | 64*128 Pixels |
| Input Voltage | AC110V ~ AC220V 50/60HZ |
| Digit DC Power | DC12V |
| Power Consumption | < 60Watts |
| Painting of Iron Case | Outdoor anti-fading and anti-rust spray paint |
| Operating Temperature | -20°C to +80°C |
| Waterproof | IP67 |
| Warranty | 4Years |
Q1: Is the epoxy resin applied on the outside or inside of the sign?
A1: Inside. The A50 hardness clear epoxy resin is poured directly into the ABS housing, completely surrounding and sealing the LED tubes — not just coated on the surface.
Q2: Why doesn't this sign need an extra acrylic panel?
A2: Because the epoxy-potted ABS housing itself is fully waterproof and UV-resistant. An acrylic panel would only add cost, reduce clarity, and trap moisture.
Q3: Can the epoxy resin yellow over time under sunlight?
A3: No. The A50 hardness clear epoxy is formulated with UV stabilizers, preventing yellowing and maintaining high transparency even after years of outdoor use on diesel price signs.
Q4: How does the internal potting affect maintenance?
A4: The front-maintenance design allows technicians to access components without removing the sign or damaging the internal epoxy potting — making repairs quick and safe.
Internal Epoxy Potting in ABS Housing – The epoxy resin is poured inside the ABS shell, fully encapsulating the LED tubes for superior waterproofing, dust sealing, and vibration resistance.
No Acrylic Panel Needed – Because the epoxy potted ABS housing already provides complete protection, no external acrylic cover is required — eliminating glare, condensation, and yellowing.
Caltex-Approved Front Maintenance – Patented design allows quick access from the front for servicing, while the potting remains intact.
64*128 LCD Remote with Custom Logo – Large LCD screen remote allows easy price changes, address code setting, and free boot logo personalization.