V Shape Pneumatic Tanker Trailer Inner Anti - Corrosion Small Discharge Loss
Description:
• Core Application
V shape dry bulk tank trailer fits for bulk transportation of building materials, metal powder, coal combustion products etc. Usually, it finishes transportation tasks assigned by building enterprises.
• V Shape
This product is configured with three axes. The V shape of the tank structure has a lot of notable characteristics: low gravity center, superior balance, fast loading and unloading etc.
• Long Life Cycle
The anti-corrosion coating on the inner wall and anti-rust paint on the outer wall perfectly protects the tank. Thus, the life cycle of the tank is prolonged.
Advantages:
• Quality Assurance
The quality of the trailer is on the basis of the durable steel plate, firm welding technology, and strict quality evaluation.
• Small Discharge Loss
Our trailer is equipped with a fluidized belt inside that can be used with an air compressor to efficiently unload powder with a small amount of residue. Accordingly, cement loss can be diminished.
• Protect the Quality of Cement
Special containers are adopted during transportation and storage. It is not easy to get wet and cement can be stored for a long time without deterioration.
Specifications:
| Overall Size | 12500mm x 2500mm x 3800mm |
| Capacity | 60 tons |
| Tank Body | Q235A/6mm steel sheet |
| End Plate | Q235A/6mm ball shape |
| Axle | 13T/16T capacity, FUWA / BPW Brand |
| Suspension | Mechanical suspension or air suspension |
| Leaf Spring | Leaf spring or air bag |
| Floor | Checkered plate |
| Tire | 11.00R20, 12.00R20, 11R22.5, 12R22.5, 315/80R22.5 for option |
| Wheel Rim | Optional range: 8.5-20, 9.0-20, 8.25-22.5, 9.0-22.5 steel wheel rim |
| Discharge Pipe | 4" seamless steel tube |
| Engine | Diesel engine or electrical motor |
| Air Compressor | 37Kw, 0.2Mpa.1000r/min |
| Kingpin | 2’’/3.5’’ bolt-in king pin |
| Landing Gear | JOST brand two-speed, manual operating, heavy duty landing gear |
| Air-charging System | 2 main hole, 2check valve, 1.5" safe valve, 0.4Mpa guage |
| Outlet Discharge Pipe | 4" rubber hose 6m |
| Braking System | WABCO RE6 relay valve; T30/30 spring brake chamber; 40L air tanks |
| Painting |
Complete chassis sand blasting to clean rust; 1 coat of anti-corrosive prime; 2 coat of final paint |
| Accessories | One standard tool box |
| Gallery | |
![]() |
|