The FRD Sensor FD80Y Industrial Pressure Gauge is designed for on-site pressure monitoring in machinery manufacturing, petrochemical systems, water supply systems and pneumatic equipment.

With a clear mechanical pointer display, FD80Y enables quick local pressure reading without an external power supply and is suitable for common industrial conditions involving vibration and pressure fluctuations.

Industrial pressure gauges often face challenges such as unclear readings, pointer fluctuation caused by pressure pulsation, zero-point deviation over time and limited adaptability to demanding environments.

FD80Y addresses these challenges with:

• Clear local indication with a mechanical pointer display and no external power required.
• Wide measurement range from 0–2 kPa to 100 MPa.
• Reliable measurement with accuracy up to 1.6% F.S.
• Wide operating temperature range from -40°C to 70°C.
• IP63 protection for general industrial environments.
• Flexible configuration for different pressure measurement and installation requirements.

FRD Sensor provides flexible OEM & ODM customization services for FD80Y based on customer equipment and application requirements.

Key customization options include:

• Measurement range
• Pressure type
• Pressure connection
• Dial specifications
• Mounting configuration
• OEM labeling

These services enable OEM manufacturers and system integrators to integrate FD80Y into different pressure monitoring equipment.

When FD80Y shows abnormal readings, follow these steps:

1. Step 1: Check Pressure Connections
   Verify proper installation and check for leakage or blockage.
2. Step 2: Check Pointer Movement
   Check for pointer sticking, excessive fluctuation or failure to return to zero.
3. Step 3: Check Pressure Fluctuations
   Determine whether excessive pressure pulsation or mechanical vibration is affecting the gauge.
4. Step 4: Check Operating Temperature
   Confirm that the ambient temperature is within -40°C to 70°C.
5. Step 5: Compare with a Reference Pressure
   Use a calibrated reference pressure source to check indication accuracy.

If the issue persists, contact FRD Sensor for technical support.

The FRD Sensor FD80Y Industrial Pressure Gauge combines clear local indication, a wide measurement range and reliable industrial performance. Requiring no external power supply, it provides a practical and cost-effective solution for on-site pressure monitoring in machinery, petrochemical, water supply and pneumatic applications.