The FRD Sensor FD80Y Industrial Pressure Gauge is designed for direct, reliable pressure indication in industrial environments. Its mechanical measurement principle provides clear local pressure readings, making it suitable for equipment monitoring, pipeline inspection, process systems, and machinery applications.

Unlike electronic pressure transmitters that convert pressure into electrical signals for remote monitoring and control, the FD80Y focuses on direct local pressure indication. This makes it a practical choice for applications where operators need to quickly observe pressure conditions at the installation site.

With flexible pressure measurement configurations and a durable industrial design, the FD80Y can be used across a variety of industrial pressure monitoring applications.

Industrial pressure gauges often face challenges such as unclear readings, pointer fluctuation caused by pressure pulsation, zero-point deviation over time and limited adaptability to demanding environments.

FD80Y addresses these challenges with:

• Clear local indication with a mechanical pointer display and no external power required.
• Wide measurement range from 0–2 kPa to 100 MPa.
• Reliable measurement with accuracy up to 1.6% F.S.
• Wide operating temperature range from -40°C to 70°C.
• IP63 protection for general industrial environments.
• Flexible configuration for different pressure measurement and installation requirements.

FRD Sensor provides flexible OEM & ODM customization services for FD80Y based on customer equipment and application requirements.

Key customization options include:

• Measurement range
• Pressure type
• Pressure connection
• Dial specifications
• Mounting configuration
• OEM labeling

These services enable OEM manufacturers and system integrators to integrate FD80Y into different pressure monitoring equipment.

When FD80Y shows abnormal readings, follow these steps:

1. Step 1: Check Pressure Connections
   Verify proper installation and check for leakage or blockage.
2. Step 2: Check Pointer Movement
   Check for pointer sticking, excessive fluctuation or failure to return to zero.
3. Step 3: Check Pressure Fluctuations
   Determine whether excessive pressure pulsation or mechanical vibration is affecting the gauge.
4. Step 4: Check Operating Temperature
   Confirm that the ambient temperature is within -40°C to 70°C.
5. Step 5: Compare with a Reference Pressure
   Use a calibrated reference pressure source to check indication accuracy.

If the issue persists, contact FRD Sensor for technical support.

The FRD Sensor FD80Y Industrial Pressure Gauge provides a practical solution for direct local pressure indication in industrial applications.For equipment, pipelines, machinery, and process systems that require simple and visible pressure monitoring, a mechanical pressure gauge can be an effective choice.

Selecting the right instrument according to the actual measurement purpose, pressure conditions, installation environment, and system requirements is essential for reliable industrial pressure monitoring.

FRD Sensor provides pressure gauges, pressure transmitters, differential pressure transmitters, and level transmitters for industrial measurement applications, with OEM and ODM support for equipment manufacturers and system integrators.