The CBC 2.5T weighing pallet truck is a manual hydraulic pallet jack with a built-in digital scale fitted on the fork frame. Instead of lifting a pallet, parking it, walking to a floor scale, weighing it, and then moving on, operators finish the whole cycle in one pass. The scale reading is shown instantly on the LCD indicator, making receiving checks and shipment verification noticeably faster.

1. Insert the 1150mm forks under the loaded pallet and pump the handle to lift it to transport height.
2. Let the load settle for about two seconds until the LCD reading stabilizes.
3. Read the gross weight directly on the indicator, then move the pallet to its destination.

The scale works with the truck's regular lifting motion, so no extra battery charging or separate weighing station is required.

Every CBC 2.5T is built around three service-critical parts.

One-Piece Cast Oil Cylinder

Display Operation Panel

Silent Shock-Absorbing
PU Steering Wheel

• Receiving docks: verify incoming goods weight against the delivery note on the spot.
• Production feeding: weigh raw material batches while moving them to the line.
• Order picking & shipping: confirm shipment weight before loading, avoiding overweight claims.
• Retail backrooms: check inbound cartons without a dedicated scale corner.

A standard pallet truck only lifts and moves. The CBC 2.5T adds an onboard scale, so goods are weighed at the moment they are handled. This removes one handling step per pallet, reduces labor walking distance, and lowers the risk of receiving errors in busy warehouses.

Because the CBC 2.5T lifts, weighs and moves in a single pass, it fits any workflow where pallet weights must be captured on the move. The table below shows the settings where our customers use it most.

It is also used in chemical plants, building-material yards, agricultural cooperatives and cold-storage operations.

Fork length from 1000mm to 1800mm, fork width options, wheel material (nylon, PU or rubber), and scale unit (kg/lb) can be adapted for customized orders. LAKER provides CE-certified production with ISO 9001:2015 quality management. Contact us for the CBC 2.5T price, lead time and sample arrangement.

Q1: What is the weighing accuracy?

A1: The 2500 kg scale has a 1 kg division, so readings are shown to the nearest kilogram.

Q2: Does the scale need a separate charger?

A2: The scale has its own indicator battery charged independently of the truck, so no external weighing station is required.

Q3: Can the display be reset to zero?

A3: Yes. A tare function lets you zero the display before loading the pallet.

Q4: Which units are shown?

A4: kg or lb, selectable in the indicator settings.

Q5: What fork lengths are available?

A5: Forks from 1000 mm to 1800 mm, with fork width options to suit your pallets.

Q6: Is the truck CE certified?

A6: Yes. Production follows CE certification and ISO 9001:2015 quality management.

Q7: How long does the reading take to stabilize?

A7: The load settles in about two seconds, and the LCD indicator then shows a stable gross weight, with auto power-off to save battery.