Swiftness, efficiency, and tenacity in extinguishing fire.
In less than 10 seconds, the FM200 pure gas automatic fire extinguishing system can completely put out a fire. The clean gas extinguishing agent FM200 normally has a low concentration — only 9% — when measured according to the reserve design extinguishing concentration. FM200 clean extinguishing agent is a liquid that can be stored and is immediately transformed into a gas that is highly driven to put out fires.
The FM200 clean gas automated fire extinguishing system is ideal for safeguarding documents, high-value equipment, electrical and magnetic media, as well as collections and archives. Protected items are not harmed, no residue is left after a fire, and the normal operations of the protected areas are not obstructed.
An extinguishing mechanism and electrical components make up the entirety of a one-set system (the composition is shown in the illustration below).
One set of the cabinet-type FM200 fire suppression equipment consists of FM200 agent, an FM200 cylinder, a hoop, a cabinet, a container valve, a solenoid actuator, a flexible hose (high-pressure hose), nozzle(s), and a pressure switch.
| No. | Specifications | Parameters |
|---|---|---|
| 1 | Cylinder capacity | 40L, 70L, 90L, 100L, 120L, 150L, 180L |
| 2 | Device model | GQQ40/2.5, GQQ70/2.5, GQQ90/2.5, GQQ100/2.5, GQQ120/2.5, GQQ150/2.5, GQQ180/2.5 |
| 3 | Filling pressure | 2.5 MPa |
| 4 | Max filling rate | 0.95 kg/L |
| 5 | Discharge time | ≤ 10 s |
| 6 | Working temperature | 0 ℃ ~ 50 ℃ |
| 7 | Max working pressure | 4.2 MPa |
| 8 | Discharge pressure | 5.6 ± 0.28 MPa |
| 9 | Proportion of protected zone | ≤ 500 m² |
| 10 | Volume of protected zone | ≤ 1600 m³ |
| 11 | Actuation | Automatic or manual start |
There are several benefits to using a cabinet fire suppression system. The following is a brief explanation of some of them: