The Piping HFC-227ea (FM200) Fire Extinguishing System is a gaseous fire suppression solution engineered for single-zone protection. It is designed to extinguish fires rapidly and efficiently in critical areas where water-based suppression would damage sensitive equipment or materials.

FM200 is a colorless, odorless, and electrically non-conductive gas that leaves no residue after discharge. It is free of chlorofluorocarbons (CFCs) and has a low global warming potential. The agent is stored in cylinders under high pressure and released into the protected area through a piping network when the system is activated.

The system comprises FM200 cylinders, release valves, detection and actuation devices, piping, and discharge nozzles. Detection and actuation devices include heat detectors, smoke detectors, manual call points, and pre-action systems.

When a fire is detected, the system triggers the release of FM200 gas into the affected area, extinguishing the fire by lowering the oxygen concentration to a level where combustion cannot occur. The gas is distributed through the piping system and nozzles to the protected area, providing fast and effective fire suppression with minimal disruption to the protected area, occupants, and assets.

FM200 systems are commonly used in data centers, telecommunications facilities, clean rooms, museums, archives, and other areas containing critical equipment or sensitive materials where water-based suppression would cause damage or destruction.

1. Clean gas — colorless, tasteless, and non-corrosive.
2. Electrical insulation — suitable for extinguishing electrical combustion.
3. No residue or pollution inside the protection zone.
4. No damage to the ozone layer.

1. Management of multiple zones.
2. Efficient fire protection in large regions.
3. Less occupation in fire-controlled spaces.
4. Relatively lower cost than cabinet or hanging type systems when the zone is large and multiple.

1. Mechanical Parts: Cylinder with container valve, frame for cylinder group, driving cylinder, frame for driving device, high-pressure hose, etc. These are mainly used for storing the FM200 agent.
2. Electrical Parts: Smoke detector, heat detector, bell, etc.
3. Pipe Fittings: Conduit, connector, elbow, flange, etc.

1. Choice of storage room, including ambient environment and volume.
2. A separated storage area for the FM200 fire suppression system.
3. Pipeline design, including placement of conduits and connections.
4. Installation and integration of each part, including connections between parts.

Guangzhou Xingjin Fire Equipment Co., Ltd. is situated in Guangzhou, a key hub for communication between China and the rest of the globe, surrounded by easy access to transit and a stunning natural environment. We are a manufacturer, and our professional and experienced staff — including the program design team, the skillful installation team, the quality detecting team, and the after-sales service team — devotes its time to the research and development of HFC-227ea (FM200) products.

Our well-known FM200 products include the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher (ceiling-mounted style), the fire detecting tube suppression system, and the automatic fire suppression tube. As a result of high-quality products and services as well as our good reputation, our company is well-received by customers in China.

• Sichuan Province: Bei Xin Run Yuan, Dong Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School, Wal-Mart near ASCB, New Hope Building, Xin Yi Zi Jin City, Tobacco Building, and others.
• Guangdong Province: GAC Group, 10086 in Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air Controller, Yingfu Building in Shenzhen, Bank of Communication in Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV Station, and others.
• Shandong Province: Lushang Office Building, Lushang Marketing Center, and others.

• 5-year quality guarantee.
• Xingjin operates under a high-efficiency management system.
• Advanced equipment and professional engineers ensure all products are highly satisfactory.
• We provide 8×6 hours of technical support and service.

• We have an efficient sales and after-sales team to resolve all client questions in a timely manner.
• We provide 8×6 hours of technical support and service.