40L Cylinders Group FM200 Gas Suppression System — Pipe Network System

FM200 (HFC-227ea) is a colorless, tasteless, non-corrosive, and electrically insulating gas that leaves no residue or pollution after extinguishing. Its Ozone Depletion Potential (ODP) is zero, making it an environmentally friendly extinguishing agent. Because of these properties, it is well suited to special locations where electrical fires are likely to occur.

Combined with the extinguishing device and electronic accessories, the entire system can be actuated automatically. It monitors the protected region through detectors and can then start the extinguishing device automatically via a solenoid actuator, achieving full automation. This eliminates the risk of a fire going unnoticed when no one is present and also saves the cost of employing personnel to supervise the protected area.

Management of multiple zones is also safely handled by the whole system. A single system can protect multiple zones through selective valves, allowing it to target different protected zones in turn. The agent is discharged only into the zone where the fire occurs, making fire suppression fast and efficient. Note that a small room should be reserved as storage space for the entire system.

The system is suitable for electronic computer rooms, data processing centers, telecommunications facilities, process control rooms, expensive medical equipment, industrial equipment, libraries, museums and art galleries, clean rooms, emergency power facilities, and flammable liquid storage areas.

It is also ideal for locations where fire is likely to occur, such as paint-spraying production lines, aging electrical equipment, rolling machines, printing machines, oil switches, oil-immersed transformers, melt impregnating tanks, large generators, drying equipment, cement production processes involving pulverized coal, and ship engine rooms and cargo holds.

The illustration below shows the working principle of the complete system.