KCW102 Low - Frequency Electromagnetic Wave Water Treatment Device

Introduction

The KCW102 low - frequency electromagnetic wave water treatment device is also known as the ultra - low - frequency water treatment equipment or the ultra - low - frequency pulsed electromagnetic wave water treatment equipment.

It treats circulating water with an electromagnetic field. The equipment consists of a frequency - conversion control box and a transmitter. The transmitter is made of titanium alloy and is installed in the cooling tower water collection tray. The control box transmits low - frequency electrical signals to the transmitter, which then emits electromagnetic signals into the water. It treats circulating water in the form of ionic current with frequency - modulated electromagnetic waves, reducing the hardness and alkalinity of the circulating water, and can also sterilize and eliminate algae. It increases the concentration multiple of circulating water, saves water, and prevents scaling in condensers, plate heat exchangers, and other heat - exchange equipment. It is a more advanced circulating water treatment technology.

Product Introduction

The KCW102 low - frequency electromagnetic wave water treatment device treats circulating water through a physical water treatment method without adding any chemicals.

The KCW102 low - frequency electromagnetic wave water treatment device consists of the following parts:

• Control system
• Electromagnetic wave emission device
• Electromagnetic wave receiver
• Online water quality monitoring equipment
• Connecting cables
• Main Applications
• Scaling Prevention

The low - frequency electromagnetic wave water treatment device treats circulating water by releasing alternating electromagnetic pulse waves of specific frequencies into it. It can effectively promote the resonance of water molecules and improve the dissolving power of water. Secondly, the ultra - low - frequency pulsed electromagnetic waves released can promote the scale - prone ions in the circulating water to crystallize actively, producing non - adsorptive crystals, such as aragonite crystals of calcium carbonate and magnesium carbonate. These crystals do not adsorb on the heat - exchange surface but are suspended in the water, flowing with the circulating water, precipitating at the bottom of the cooling tower, or being discharged through the blowdown valve.

Corrosion Prevention

Heat - exchange equipment in circulating water is prone to corrosion, mainly due to the abundant oxygen in the water and corrosive ions such as iron ions and copper ions. Long - term corrosion can lead to the scrapping of heat exchangers and water pipelines. The low - frequency electromagnetic wave water treatment device can promote the movement of positive and negative ions in the water in opposite directions, forming a weak current. This enables the dissolved oxygen in the water to gain an electron and react with iron ions to form a Fe₃O₄ protective layer, preventing corrosion.

Sterilization and Algae Removal

The low - frequency electromagnetic wave water treatment device inhibits the metabolism of bacteria and algae through frequency - modulated electromagnetic waves, destroys the cell wall, and reduces the cell division rate, thereby achieving the effect of sterilization and algae removal.

Technical Advantages

Adopts pure physical technology without the need to add chemical agents.

Has the effect of sterilization and algae removal, and can inhibit the growth and reproduction of Legionella and other strains.

Effectively controls corrosion and extends the service life of equipment.

Increases the concentration multiple, saves water, and reduces water replenishment.

The equipment operates automatically and requires no manual maintenance.

The circulating cooling water treatment system is equipped with online water quality monitoring. All important operating parameters and water quality data (including conductivity, pH, corrosion rate, turbidity, etc.) are monitored in real - time by online sensors.

Technical Specifications