Ip68 4~20mA RS485 Ammonia Nitrogen Sensor For Water Quality

Kacise KAN601 Online Ammonia Nitrogen Sensor Patented Probe IP68 Protection Level Easy To Install: 3/4 NPT Thread

KAN601 Online Ammonia Nitrogen Sensor

Application Environment

KAN601 integrated online ammonia nitrogen sensor is fabricated using a PVC membrane-based ammonium ion-selective electrode for testing ammonium ion content in water with temperature compensation to ensure fast, simple, accurate, and economical testing. The technical parameters, maintenance, and communication protocols of the ammonia nitrogen sensor are described in detail in this user manual.

• Signal output: RS-485 bus, Modbus/RTU protocol, convenient to connect to PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen, and other third-party equipment.
• In the patented ammonium ion probe, the internal reference solution oozes extremely slowly from the microporous salt bridge at a pressure of at least 100 KPa (1 Bar). Such a reference system is very stable and has a longer electrode life than conventional industrial electrodes.
• Easy to install: 3/4 NPT thread (pipe thread) for easy submersible installation or installation in pipes and tanks.
• IP68 protection level.

Technical Specifications

Dimensional Drawing

Tip: Do you know this method for determining ammonia nitrogen?

Meteorological molecular absorption spectroscopy:

Sodium hypobromite oxidant is added to the water sample to oxidize ammonium and ammonium salt into nitrite, and then the ammonia nitrogen content in the water sample is determined by the nitrite nitrogen image analysis absorption spectrometry.

This method measures 0.005mg/L on the lower line and 100mg/L on the upper line. It can be used for the determination of ammonia nitrogen in surface water, groundwater, and seawater.

Contact Us

Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China