MachineU > China Products > Chemicals > Surface Treatment Chemicals > Oxidizing Chemicals
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
Specifications
Brand Name :
kacise
Model Number :
KFDO601
Certification :
CE
Place of Origin :
CHINA
MOQ :
0-100
Price :
$0-$2000
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :
100
Delivery Time :
3-10days
Packaging Details :
Common package or custom package
Measuring principle :
Fluorescence method
Range ability :
0~20mg/L (0 ≤ 200% saturation)
Resolution ratio :
0.01mg/L，0.1℃
Precision :
±2%F.S.，±0.5℃
Temperature compensation :
Automatic temperature compensation（Pt1000）
Output mode :
RS-485 bus, Modbus-RTU protocol
Description

KFDO601 Online Fluorescence Dissolved Oxygen No Electrolyte Is Required And Will Not Be Polarized No Oxygen Consumption

1.Dissolved oxygen measurement applications

  • Food and Beverages
  • The pharmaceutical
  • Energy and electricity
  • education
  • The government
  • water
  • Waste water management

2.the Difference of Polarographic probe and optical probe

　 Polarographic probe optical probe
maintence Replace the electrolyte approximately every 2 months and polish the cathode as needed to clean the probe Clean probe, cover and optical window as needed
storage Stored in a wet calibration sleeve;For long-term storage, remove the film cover and store in a dry place Store in a wet calibration sleeve
film Replace approximately every 2 months as needed no
solution Replace approximately every 2 months as needed no
Need to preheat (30-60 minutes) if only connected to the meter 　
stir need unnecessary
disturb Ozone, sulfides, sulfur dioxide, nitrous oxide and carbon monoxide 　

3.Feature

  • No electrolyte is required and will not be polarized.
  • No oxygen consumption, not affected by flow rate.
  • Built-in temperature sensor, automatic temperature compensation.
  • Free from interference by chemicals such as sulfides
  • Small drift, rapid reaction, more accurate measurement.
  • Long service cycle, lower cost of use.
  • Simple replacement of fluorescent cap.
  • Rs-485 interface, Modbus/RTU protocol.
  • Low power consumption,anti-interference.

4.Technical Specifications

Model KFDO601
Measuring principle Fluorescence method
Range ability 0~20mg/L (0 ≤ 200% saturation)
Resolution ratio 0.01mg/L,0.1℃
Precision ±2%F.S.,±0.5℃
Temperature compensation Automatic temperature compensation(Pt1000)
Output mode RS-485 bus, Modbus-RTU protocol
Working conditions 0～45℃,<0.2MPa
Storage temperature -5～65℃
Installation mode Immersion mounting
Cable length 5 meters, other lengths customizable
Power dissipation ＜0.3W@12V
Source 12～24VDC ±10%
levels of protection IP68
Calibration Two-point calibration
Fluorescent cap life Guaranteed use for one year (under normal use)
Sensor shell material POM and 316L stainless steel

5.Dimensional Drawing

KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%

Note:The sensor connector is m16-5 core waterproof connector male.

6.Installation

KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%

The sensor shall be installed fixedly below the liquid level. The installation and use shall avoid collision or scraping against the surface of the fluorescent film head. The fluorescent film head part shall avoid being attached by the bottom sediment.Remove the rubber cover when use.

Contact Us

Website www.kacise.com
Phone +86-17719566736
Email sales@kacise.com
Location Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%

Product tags

denso oxygen sensor

,

optical dissolved oxygen sensor

,

denso sensor
Send your message to this supplier
Send Now

KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%

Ask Latest Price
Product Detail
Brand Name :
kacise
Model Number :
KFDO601
Certification :
CE
Place of Origin :
CHINA
MOQ :
0-100
Price :
$0-$2000
Contact Supplier
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%
KFDO601 dissolved oxygen sensor with anti-interference and RS485 interface with precision ±2%

Xi'an Kacise Optronics Co.,Ltd.

Verified Supplier
7 Years
Shaanxi
Since 2008
Business Type :
Manufacturer
Main Products :
Fluid Level Meter, Water Quality Sensor, Precision Pressure Sensor
Total Annual :
8000000-10000000
Employee Number :
100~150
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Water Quality Sensor
MachineU China Products Chemicals Surface Treatment Chemicals Oxidizing Chemicals
Contact Supplier
Submit Requirement