457 mm / 18-Inch Working Width: Suitable for commercial floor scrubbing, polishing and routine floor maintenance.
1,800 W Motor: Provides powerful and stable performance for demanding commercial floor-care applications.
175 rpm Brush Speed: Provides controlled low-speed operation for scrubbing, polishing and compatible floor-treatment tasks.
12 m Power Cord: Provides a wide operating range with fewer electrical-outlet changes.
Approximately 60 dB Operating Noise: Suitable for commercial environments where controlled operating noise is important.
85 kg Net Weight: Provides stable brush contact during demanding floor scrubbing and polishing tasks.
Machine Dimensions: Measures 570 × 450 × 1,310 mm for transportation and storage planning.
















The KW18 is designed for commercial floor scrubbing, polishing and routine floor maintenance. The exact application depends on the brush, pad holder, cleaning pad and floor-care chemical fitted to the machine.
No, the KW18 does not automatically recover wastewater. It is a single-disc floor machine rather than a scrubber dryer. Wet cleaning normally requires a separate wet vacuum, mop or compatible wastewater-recovery machine.
The KW18 has a 457 mm, or 18-inch, working width. The wider cleaning path is suitable for hotels, offices, shops, schools, restaurants, public buildings and other commercial floor-care applications.
The KW18 has a 1,800 W motor and operates at 175 rpm. This provides powerful, controlled performance for compatible scrubbing, polishing and floor-maintenance accessories.
The KW18 can maintain common commercial floors when fitted with the correct brush or cleaning pad. Typical applications include tile, terrazzo, marble, vinyl and sealed concrete. Delicate or coated surfaces should be tested in a small area first.
The KW18 is equipped with a 12 m power cord. The long cable provides a wider operating range and reduces the frequency of changing electrical outlets.
Buyers should confirm the operating voltage, frequency, plug standard and cable requirements for the destination market. The supplied specifications confirm 1,800 W motor power and a 12 m power cord but do not specify voltage or frequency.