OD830 Pipe Cutting and Beveling Machine 26 to 32 Inch Heavy Duty Cold Cutting Tool

The OD830 Pipe Cutting and Beveling Machine accommodates pipes from 26" to 32" (660–830 mm). Designed for large-diameter pipe work, it ensures maximum stability and machining precision in demanding environments. Its advanced clamshell design reduces setup time and enhances safety during cutting and beveling operations. The OD830 is capable of producing consistent bevel profiles required for welding in critical applications. Widely used in the oil & gas sector, shipbuilding, and heavy industrial plants, this model provides excellent adaptability with its multiple drive systems and versatile tooling configuration.

SPECIFICATIONS

PRODUCT ADVANTAGES

Why Choose the OD830 Pipe Cutting and Beveling Machine?

High-Performance Cutting

Ensures clean, burr-free pipe edges for welding and assembly.

Sturdy and Reliable

Built with reinforced materials to endure harsh field conditions.

Wider Pipe Coverage

Capable of machining pipes up to 830 mm OD for large-scale projects.

Accessory Expansion

Can be equipped with a range of accessories to maximize versatility.

Operator Friendly

Lightweight body with ergonomic design ensures easier handling on-site.

SELECTION GUIDE

Please follow the guidelines below or provide us with your specific requirements so that we can offer you the most professional model selection advice.

1. Choose the Clamshell Material

The OD series clamshell pipe cutting and beveling machines consist of a main body ring and a rotating gear ring. The gear ring is made of heat-treated alloy steel, while the main body ring can be selected in either aluminum or steel.

AOD model (Aluminum): Recommended for on-site machining, especially where lifting equipment is not available.

OD model (Steel): Offers higher strength and longer service life, suitable for heavy-duty and long-term applications.

For model OD560 and below, the machine can be split into two halves for manual handling, regardless of whether it is aluminum or steel. For model OD610 and above, if manual handling is required, we recommend the aluminum body.

2. Choose the Drive Type

ODM (Electric): Suitable for more than 80% of applications. Requires 220V-50Hz power supply and is convenient for on-site use.

ODP (Pneumatic): Suitable for sites with explosion-proof requirements. However, performance may be affected if the air supply is far from the site or if air pressure is low.

ODH (Hydraulic): Recommended for model OD830 and above to ensure greater power. Please note, however, that hydraulic stations are costly and inconvenient to transport.

3. Confirm Pipe Wall Thickness

For wall thickness ≤30 mm, use the standard tool slide.

For wall thickness >30 mm, use the heavy wall tool slide, as different toolbit sizes are required.

4. Confirm Bevel Angle and Bevel Type

The bevel angle and type are required to select suitable toolbits, such as V-type, J-type, or compound bevels.

5. Confirm Pipe Material and Quantity

Pipe material and quantity are necessary to determine the proper toolbits and the number of toolbits required.

PIPE CUTTING AND BEVELING MACHINE SELECTION TABLE

OD830 Pipe Cutting and Beveling Machine Application Industries

Extensively used in large-diameter oil pipelines, this machine ensures reliable cold cutting without distortion. In nuclear reactor facilities, it guarantees weld integrity under strict safety codes. Port ship maintenance teams apply it for oversized pipe joints. In chemical reactors, it handles corrosion-resistant steel machining. It is also effective in offshore engineering projects, solving problems of heavy pipe beveling in remote areas.

Exhibition Photos

MT Portable Machine, as a professional manufacturer of on-site machining equipment, participates in exhibitions worldwide.