Good resistance to industrial fluids hexafluoropropylene vinylidene fluoride rubber

Description:

Fluorine rubber or FKM or FKM is based on hexafluoropropylene vinylidene fluoride. Temperature range -30 centigrade to +250 centigrade.Good resistance to most chemicals and industrial fluids, will retain strength and withstand embrittlement during long-term heat exposure.

FKM's are service in continuous heat of up to 250cnetigrade and intermittent heat of up to 300 centigrade.Satisfactory resistance to low temperatures of typically -20 centigrade and -40centigrade by use of special grades.FKM's exhibit good flame resistance and are usually self extinguishing upon removal of flame source.FKM compounds have outstanding resistance to compression, especially at elevated temperatures.

Resistance to chemicals: Amongst all synthetic rubbers FKM's are the most resistant to many of the solvents and chemicals, giving long service where other materials do not. Excellent resistance against hydrocarbons aliphatics aromatic and chlorinated chemicals. Good resistance to acids and alkali's including oxidants.

They do have poor performance against ethers, ketones, and bases.

Application:

Mechanical equipment

Petroleum and chemical industy

Auto industry

Power industry

Military industry

Aerospace industry

Fluororubber is used in the following environments:

High temperature

Oxidation

Different types oil

Corrosion

Atmospheric aging

Electrical insulation

Vacuum

Radiation

Working temperature:-20 degree to 250 degree

Rubber sheet information:

Color: Black, brown, white etc.

Hardness: 60-90 Shore A

Thickness: 0.5mm to 20mm

Length, not limited.

Width: 1m, 1.2m, 1.5m, 2m

Type: 66%/68%/70% fluorine content material

Density: 1.9-2.1 g/cm3

Typical property:

Picture show: