A192 Seamless Tube Boiler Steel Pipe Astm A192 High Pressure Seamless Boiler Tube
ASTM specifications Boiler steel tube are used for high temperature service applications.
Danyal Pipelines can provide various grades of seamless steel pipes, such as A179, A192, A210, A213, A335 ,..etc
| Standards | Grades |
Production Standards | GB 5310 | 15MoG, 15CrMoG, 15CrMo, 12Cr2MoG, 12Cr1MoV, 12Cr2MoWVTiB, 10Cr9Mo1VNb |
ASTM A179 | A179 |
ASTM A192 | A192 |
ASTM A210 | Gr.A-1 , Gr.C |
ASTM A213 | T2, T5, T5b, T5c, T9, T11, T12, T17, T21, T22, T91, T92 |
ASTM A333 | Gr.4, Gr.9, Gr.10, Gr.11 |
ASTM A334 | Gr.9, Gr.11 |
ASTM A335 | P1, P2, P5, P5b, P5c, P9, P11, P12, P15, P21, P22, P91,P92 |
ASTM A519 | 1330, 1335, 3140, 4140, 4130, 4337,....etc. |
DIN 17175 | 15Mo3, 10CrMo9 10, 13CrMo44, 14Mov63 |
EN 10216-2 | P195GH, P235GH, P265GH, 16Mo3, 10CrMo9-10 |
JIS-G3341 | SCr 420TK, SCM 415TK, SCM 418TK, SCM 420TK, SCM 430TK, SCM 435TK, SCM 440TK |
Size | 1/2 inch to 28 inch & Wall thickness (1.5 ~30) mm |
Packing | Bundles with PE wrapping, Wooden case or customized |
ASTM A192Chemical Composition:
Steel Grade | C | Si Max | Mn | P | S |
Steel Name | Steel Number | max | max |
A192 | | 0.06-0.18 | 0.25 | 0.27 - 0.63 | 0.035 | 0.035 |
ASTM A192 Mechanical Property:
Steel Grade | Tensile Strength | Yield Strength | Elongatinon |
Steel grade | Steel Number | Min, MPA | Min, MPA | Min, % |
A192 | | 325 | 180 | 35 |

We warmly welcome and looking forward to have a nice cooperation with company both at home and at abroad.
Boiler Tube
We have a mill with boiler/heat exchanger seamless steel pipes production lines
Our production line for cold drawn seamless pipes:
OD: 17.1-323.8mm,
Wall thickness: 2-30mm
Application: For high, middle, low pressure boiler and pressure purpose, Boiler/heat exchanger/pressure vessel/oil/gas/chemical industry/auto/gas cylinder pipe/petroleum cracking etc
Production Standard
ASTM A 106 Grade A, B, C
ASTM A53 Grade A, B
ASTM A178 Grade A, C, D
ASTM A192
ASTM A210 Grade A-1, C
BS3059-I 320 CFS
BS3059-II 360, 440, 620-460, 622-490, S1, S2,TC1, TC2
EN10216-1 P195TR1/TR2, P235TR1/TR2, P265TR1/TR2
EN10216-2 195GH, P235GH, P265GH, TC1,TC2
DIN 17175 ST35.8, ST45.8
DIN 1629 ST37.0, ST44.0, ST52.0
JIS G3454 STPG370, STPG410
JIS G3461 STPG340, STB410, STB440
GB 5310 20G, 15MoG,12CrMoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB
GB9948 10, 20, 12CrMo, 15CrMo
GB3087 10, 20
Surface treatment
Oil, Varnish, Passivation, Phoshating, Shot Blasting
Delivery Condition
Annealed, Nomalized, Normalized and Tempered
Inspections and test
Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Hardness Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, NDT TEST ( ET TEST, UT TEST)






