Standard& Material: | GB5310-2013 Standard: 20G,25MnG, 15MoG,15CrMoG, 20MoG, 12CrMoG, 12Cr2MoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb, 15CrMoG, 10CrMo910,ASTM A209M/AS-209M Standard A209T1/SA209 T1, A209T1b/SA-209 T1b, A209T1a/SA209 T1aASTM A210M/SA-210M Standard A210 A1/ SA-210 A1, A210C, SA-210CASTM A213M/ASME SA 213 M Standard: T2, T5, T9, T11, T12, T22, T23, T24, T91, T911, T92, T122ASTM A333M/ASME SA-333/SA333M Standard: Gr1, Gr3, Gr4, Gr6, Gr7,Gr8,Gr9, Gr10, Gr11ASTM A334M/ASME SA-334/SA334M Standard: Gr1, Gr3, Gr6, Gr7,Gr8, Gr9, Gr11ASTM A335/ASME SA335 Standard: P1, P2, P5,P5b, P5c, P9, P11, P12,P21,P22,P23, P24, P91, P92ASTM A519 Standard: 4118, 4130,4135,4137,4140ASTM A691 Standard GRADE 91, CM65, CM70, CM75, CMSH70, CMS75, CMSH80,ASTM A691 Standard GRADE 1/2 Cr, GRADE 1CR, GRADE 1 1/4 CR, 2 1/4Cr, 3CR, 5CR, 9 CRDIN17175 Standard: ST35.8, ST45.8, 15Mo3, 13CrMo44, 10CrMo910, 14MoV63,12Cr1MoVEN10216-2 Standard: P195GH, P235GH, P265GH, 13CrMo4-5, 10CrMo9-10, 16Mo3, 10CrMo5-5, X10CrMoVNb9-1JIS G3458 Standard: STPA12, STPA20, STPA22, STPA23, STPA24, STPA25, STPA26JIS G3441 Standard:SCR420 TK,SCM415 TK, SCM418 TK, SCM420TK, SCM430TK, SCM435TK, SCM440TK.NF A49-213/215 Standard: TU15D3, TU13CD4-04, TU10CD910, TUZ10CD505Alloy C276BS3059 Standard: S1-622-440, S2-622-440, S1-622-490, S2-622-490, S1-629-470, S2-629-470, S2-629-590BS3604Standard: HFS625 CFS625BS3606Standard: CFS625 |
Size: | O.D:6-760mm W.T:1-80mm Fixed Length: 5.8m, 6m, 11.8m, 12m, or random length as required. |
Application: | 1) Boiler, Superheater, Heat Exchanger;2) Petroleum;3) Aerospace;4) Chemical;5) Electric Power;6) Military.Alloy steel pipe applies to petroleum, chemical industry, electric power, boiler, high temperature resistant, low temperature resistant, corrosion resistant part. |
Testing | Tensile Test, Hardness Test, Impact Test, Bend Test, Flattening Test, Flaring Test, Hydrostatic or Nondestructive Test |
Technique | Hot Rolled, Cold Drawn, Cold Rolled |
Package | Export standard package; bundled wooden box, suit for all kinds of transport,or be required |
Grade | C | Si | Mn | P | S | Cr | Mo |
P5 | Max.0.15 | Max.0.50 | 0.3-0.6 | Max.0.025 | Max.0.025 | 4--6 | 0.45-0.65 |
P11 | 0.05-0.15 | 0.5-1.0 | 0.3-0.6 | Max.0.025 | Max.0.025 | 1.0-1.5 | 0.44-0.65 |
P12 | 0.05-0.15 | Max.0.50 | 0.3-0.61 | Max.0.025 | Max.0.025 | 0.8-1.25 | 0.44-0.65 |
P22 | 0.05-0.15 | Max.0.50 | 0.3-0.6 | Max.0.025 | Max.0.025 | 1.9-2.6 | 0.87-1.13 |
Mechanical properties | | | | | | | |
Grade | Yield point (Mpa) | Tensile strength (Mpa) | Elongation(%) | Impact value(J) | | | |
P5 | ≥205 | ≥415 | See table | ≥35 | | | |
P11 | ≥205 | ≥415 | See table | ≥35 | | | |
P12 | ≥220 | ≥415 | See table | ≥35 | | | |
P22 | ≥205 | ≥415 | See table | ≥35 | | | |