Tire Dynamic Balancing Lubricant
Technical Introduction
SR-LB06 is applied to the tire bead area before dynamic balancing to provide lubrication, facilitating rim installation. This product does not contain silicone-based lubricants. The lubricating effect disappears immediately after drying, preventing the tire from becoming loose from the rim due to the long-term presence of silicone-based lubricants during subsequent use.
 Tire dynamic balancing lubricant SR-LB06 is a transparent, homogeneous liquid. After drying on the tire, it becomes colorless and transparent, avoiding the data errors that can occur with other lubricants.
 Tire dynamic balancing lubricant SR-LB06 produces very little foam after mixing with water, making it easy to use and not affecting test data.
Application Areas:
Various tire production, testing, and subsequent use.
Instructions for Use
 Tire dynamic balancing lubricant SR-LB06 can be diluted with 2-5 times its volume of water and stirred evenly before use.
 Tire dynamic balancing lubricant SR-LB06 can be applied manually. It is recommended to use a sponge, clean cloth, or brush for even application.
 Rim installation should be completed before the lubricant dries.
Technical Specifications
Composition: Polymer emulsion, surfactant, and chelating agent.
Appearance: Colorless, transparent, homogeneous liquid.
Density: 1.00±0.1 g/cm³
PH: 6.5-8.5
Packaging
20KGS, 50KGS plastic drums or packaged according to requirements.
Safety and Transportation
Tire dynamic balancing lubricant SR-LB06 is non-toxic and non-polluting. According to transportation laws, it is a non-hazardous material and should be transported as such. Proper use of this product will not cause any harm.
Storage
Tire dynamic balancing lubricant SR-LB06 must be stored in a sealed container. It should be protected from freezing, high temperatures, and direct sunlight. Under these conditions, the storage life is at least one year. The production date is indicated in the production batch number on the packaging label.