CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.    Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube? all encased in an outer sock material. All are 6 in. OD (152 mm) by 31∕2 in. ID (89 mm) and available in standard interchangeable nominal lengths from 111∕4 in. (290 mm) to 571∕4 in. (1450 mm).
   
  The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance? uniform threads, no shrinkage, no galling and no gasket to recover.
   
  A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
   
   
  Features:
  * Multi-layered media for increased solids holding capacity
 * Ultra-fine solids removal
 * Maximum water coalescence
 * Balanced cartridge flow characteristics
 * Recommended maximum operating temperature: 240°F (115°C)
 * Withstands in excess of 75 psi differential pressure
 * pH range from 5 to 9
 * Screw base or open-end configuration
   
  Materials
  * All metal components are treated against corrosion
 * Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
 * Buna-N gaskets --other materials are available on request