Gigabit Optical Fiber Switch 2 Gigabit SFP and 4 10/100Mbps Ethernet and 4 10/100Mbps SFP
Technical Parameters
| 10/100Mbps Network Ports | 4 |
| 10/100Mbps Optical Ports | 4 |
| 10/100/1000Mbps Optical Ports | 2 |
| Network Ports Properties | RJ45 |
| | IEEE802.3,IEEE802.3U,IEEE802.3X protocol |
| Support | Support half-duplex, full-duplex, auto-negotiation mode |
| Support | Support MDI/MDI-X adaptation |
| Delay | ﹤9.6μS |
| Bit Error Rate | ﹤1/1000000000 |
| Backplane Bandwidth | 7.6G |
| Cache | 1Mbit |
| MAC address table | 8K |
| Max Frame Length | 1632bytes |
| Power consumption | <10W |
| Transmission distance | 0-100km |
| Exchange way | Store-and-Forward |
| IPC Extender | IPC to switch can be 200m |
| VLAN | support |
| CBIT | support |
| Power terminal | 6 PIN industrial terminal, one way relay alarm output |
| Overload protection | support |
| Reverse connect protection | support |
| Redundancy protection | support |
| Power input | DC12V~48V |
| Operating Temperature | -40 ~ 85℃ |
| Working humidity | 5% ~ 95% |
System Overview
10 ports Gigabit Fiber Ethernet Switch has 4 10/100M UTP port and 4 10/100M SFP ports and 2 1000M SFP sockets/slots. Customer can choose different 1000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX etc. The product is possessed of stable performance, excellent quality and reasonable price with adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet.
Product Features
- Supporting all the network HD cameras and other network signals;
- Being compatible for IEE802.3,IEEE802.3U,IEEE802.3X and other internet protocol;
- Supporting the transmission pattern of full-duplex and half-duplex, with the ability of automated negotiation;
- Having the function of setting ring net in all the devices, and change transmission while the disconnection of the intermediate node;
- Support dial the code switch to set up monitoring mode function, extended the IPC access distance to be 250M
- Support VLAN function: Block mutual communication between downlink ports; improve the efficiency of data forwarding to ensure the safety of system, inhibit network storm functions: automatic identification and filtering broadcast packets.
- Support the din rail & desktop installation
- Support the CBIT to ensure the HD image.
- Providing the transmission of ultra low delayed data;
- Protecting from network broadcast radiation;
- Adapting parallel or cross-wire connection;
- It can switch Ethernet signals and optical signal.
- Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
- The SFP slot supports 1000M and Full Duplex mode.
- Supports flow control and broadcast storm protection.
- Supports VLAN and QoS.
- It is low power consume, low heat, and good reliability.
- Having APC circuit, with constant optical power output and wide dynamic range;
- Optical fiber transmission, with large capacity which could be upgraded easily;
- Having advanced adaptive technology, no field of the use of optical or electrical adjustment
- Adapting three-level lighting protection technology on the computer ports and network signals.
Product picture

Application Diagram

Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
