Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function
Industrial Ethernet Switch Advantages
► Transparent Transport and very low delay
► 3R function (Regeneration, Reshaping, Re-timing)
► Support hot plugging, full state led display, easy installation
► Support ITUT prescribed DWDM/CWDM wavelength, and can also display it’s DDM function
► Support Loop-back and Jumbo Frame
► DIP Switch supports 1.25G/10G fiber data rate switching
► Can be as 1G Ethernet Media Converter if using Ethernet
► IP40 Aluminum Case
Industrial Ethernet Switch Technical Indexes
Performance Data | Technical Indexes | |||
Equipment function | 3R Repeater | |||
Transmission Speed | 10G: 8.5Gb/s-11.7Gb/s | |||
Protocols | 8.5G Fiber Channel SONET OC-192, SDH STM-64 (9.95Gbps) 10G WAN (10Gbps) 10G LAN (10.31Gbps) OTN OTU-2 (G.709) (10.70Gbps) 10G LAN with 255/237 FEC coding (11.09Gbps) 10G Fiber Channel (11.32Gbps) 10G POS | |||
Maximum Packet Forwarding Rate | 14,880,950/S | |||
Ethernet Media Converter Specifications | ||||
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x Full-duplex flow control | |||
Work Mode | 10/100/1000BASE-T to 1000BASE-SX/LX | |||
Port Type | SFP to RJ45 | |||
Network Cables | Twisted-pair Fiber-optic Cable | |||
Electrical and Mechanical | ||||
Power Input Overload | Automatic Resettable | |||
Reverse Polarity | Present | |||
LED Indicators: | ||||
PWR | Power Status | |||
FX1 | SFP Port-1 | |||
FX2 | SFP Port-2 | |||
L/A | TP LINK/ACT | |||
Casing | Aluminum Case | |||
Mounting Options: | DIN-Rail mount |
Industrial Ethernet Switch Overview
ETH-IMC2402-OEO series Industrial 10G OEO Converter is a connection between fiber to fiber 10Gbps equipment function as fiber media converter, or as fiber repeater for long distance transmission in harsh environment at operating temperature -40~ 80℃.
It is for network backbone (SAN, LAN, MAN) application. Support SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet, which can be applied in R&D laboratory, data center, telecommunication room. It supports optical wavelength conversion 1310nm/1550nm/CWDM/DWDM with Loop-back.
When only the copper and fiber port are connected, it enables the 1Gbps Ethernet equipment to function as a fiber-to-copper media converter, allowing for long-distance transmission up to 120km between fiber and copper connections.
Ordering Information
Model | Description |
ETH-IMC2402-OEO | Industrial 1G/10G SFP+ to SFP+ OEO Converter (3R Repeater) with 1G Ethernet Media Converter Function |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
► SFP module is to be purchased separately. | |
Mounting Options | ► Default DIN-Rail Bracket installed |
Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
► Power Supply is to be purchased separately. |