Overview
The LNK-EOC180P receiver works with the transmitter of 1 port Ethernet Extender over Coax with PoC (LNK-EOC110P-T) to provide Ethernet Extension of 8/16 channel 10/100Base-TX over Coaxial cable to 4-port 10/100/1000Mbps Ethernet. The maximum transmission distance is 800m. The product support PoC, hence, no power point is required at the camera side for the transmitter (LNK-EOC110P-T) and its connected IP camera if the camera obtain power from the transmitter via Power over Ethernet (PoE). The Ethernet data received by anyone of the coax data port (1-8/16) at the receiver is transferred to all four Ethernet ports (P1-P4). The product is good for retrofit of analogue system by using the existing coaxial cable infrastructure.
Features
Technical Indexes
| Ethernet | |
| Standards | IEEE802.3 10Base-T | 
| IEEE802.3u 100Base-TX | |
| IEEE802.3ab 1000Base-T | |
| Cabling | 100Base-TX: Cat5 or above | 
| Maximum Distance | Cat5UTP up to 100m | 
| Connector | 4 x RJ45 | 
| Coaxial | |
| Cabling | Coaxial Cable (75 ohm) | 
| Connector | 8 BNC (female) | 
| Distance | 800m | 
| Data Rate per port | 40Mbps Max. (Downlink) | 
| 10Mbps Max. (Uplink) | |
| Technology | Power Line Communication (PLC) | 
| Protection | |
| Reverse Polarity | Present | 
| Overload Protection | Present | 
| Electrical and Mechanical | |
| Input Power | 100-240VAC, 50/60Hz | 
| Power Consumption | 16W Max. w/o PoC | 
| 500W Max. w/PoC | |
| Dimensions (W x D x H) | 483 × 300 × 44 mm | 
| Weight | 4 Kg | 
| Casing | Aluminum case | 
| Environmental | |
| Operation Temperature | -10°C to 60°C (14℉ to 140℉) | 
| Storage Temperature | -40°C to 85°C (-40℉ to 185℉) | 
| Relative Humidity | 5% to 90% non-condensing | 
| MTBF | > 100,000 hrs | 
| Regulatory Approvals |  			 ISO9001 FCC Part 15 Class A EN55022 Class A Surge Protection RJ45: 1KV BNC: 2KV Power: 500V  |  		
Application

