PLC Control Pitch Change Cable Twisting Machine Double Twist Bunching Machine
i-suntop Electric wire and cable equipments2022022...
1. Application for PLC Control Pitch Change Cable Twisting Machine Double Twist Bunching Machine :
Apply for the bunching of aerospace, medical instrument, cellphone,notebook PC and ultra fine conductor(above seven pcs of alloy wires, tinned wires, silver jacketed wires and enamelled wires).
2. Machine specification for PLC Control Pitch Change Cable Twisting Machine Double Twist Bunching Machine :
| Machine type | GF-650 |
| Single wire diameter | Φ0.16-1.0mm |
| Stranding cross-section area | 0.8-6.0mm2 |
| Stranding pitch | 11.15-60.24mm |
| Volume of loading copper(Max.) | 400kg |
| Twist arch speed(Max.) | 1800rpm/min |
| Stranding direction | S/Z |
| Automatic stop | 1. Automatic brake for inside and outside wire broken |
| | 2. Automatic meter-counting send signal to inform when set meter is reached |
| Bearing | Main bearings from Sweden, subsidiary bearings from Japan |
| Main motor power | 7.5KW frequency control |
| Noise index | About 75dB |
| Take-up shaft | Φ500mm,Φ630mm |
| Machine size | 2900*1500*1650 |
| Machine weight | 3350kg |
3. The Advantages of PLC Control Pitch Change Cable Twisting Machine Double Twist Bunching Machine
- High quality stranding wire
Th wire-passing system adopts a new structure and the wire directly passed from the main shaft guide wheel to bow band, so the
scratching and jumping phenomenon caused by failure of the corner guide wheel on the Al wheel is subtracted.
-Reduce the failure rate and maintenance costs
The main engine is oil lubricated and naturally circulated and cooled, which effectively extends the service life of the main
shaft bearings.
The bearings of the whole machine are all well-known Japan brands, The bow belt is made of new materials and has good flexibility.
In high-speed operation, it avoids jumping stock caused by vibration. Inverter, magnetic powder clutch, electromagnetic brake,
hydraulic jack etc are all imported famous brands.
-Easy to operate
Siemens software, PLC control, Operate on the touch screen, change gear to change lay length.
